Violet Silicone Soft Thermal Conductive Pad for RDRAM Memory Modules 2.6W/mK, 35 Shore00, 2.80 g/cc

Violet Silicone Soft Thermal Conductive Pad for RDRAM Memory Modules 2.6W/mK, 35 Shore00, 2.80 g/cc

 The TIF™500 Series is recommended for applications that require a minimum amount of pressure on components. The viscoelastic nature of the material also gives excellent low-stress vibration dampening and shock absorbing characteristics. Ziitek TIF™500 is an electrically isolating material, which allows its use in applications requiring isolation between heat sinks and high-voltage, bare-leaded devices.

Features:

>  Good thermal conductive: 2.6 W/mK 
>  Naturally tacky needing no further adhesive coating 
>  Soft and Compressible for low stress applications
>  Available in varies thickness

Applications:

>  Cooling components to the chassis of frame  
>  High speed mass storage drives
>  Heat Sinking Housing at LED-lit BLU in LCD
>  LED TV and LED-lit lamps
>  RDRAM memory modules 
>  Micro heat pipe thermal solutions 
>  Automotive engine control units
>  Telecommunication hardware
>  Handheld portable electronics
>  Semiconductor automated test equipment (ATE)

Standard Thicknesses:           
0.010" (0.25mm)       0.020" (0.51mm)       0.030" (0.76mm)       0.040" (1.02mm)       0.050" (1.27mm)       0.060" (1.52mm)       0.070" (1.78mm)       0.080" (2.03mm)       0.090" (2.29mm)       0.100" (2.54mm)       0.110" (2.79mm)       0.120" (3.05mm)       0.130" (3.30mm)       0.140" (3.56mm)       0.150" (3.81mm)       0.160" (4.06mm)       0.170" (4.32mm)       0.180" (4.57mm)       0.190" (4.83mm)       0.200" (5.08mm)
Consult the factory alternate thickness.

Standard Sheets Sizes:         
8" x 16"(203mm x 406mm)   16" x 18"(406mm x 457mm)
TIF™ series Individual die cut shapes can be supplied. 

Peressure Sensitive Adhesive:                     
Request adhesive on one side with "A1" suffix.
Request adhesive on double side with "A2" suffix.

Reinforcement:                     
TIF™ series sheets type can add with fiberglass reinforced.

 

 

Packaging Details & Lead time

 

The packaging of thermal pad

1.with PET film or foam-for protection

2. use Paper Card To Separate Each Layer

3. export carton inside and outside

4. meet with customers' requirement-customized

 

Lead Time :Quantity(Pieces):5000

Est. Time(days): To be negotiated