|
[China]
Trade Verify
Address: Room2007, Building B, Huijin Business Center, Yangshe Town, Zhangjiagang City
Contact name:Camille Cai
Suzhou Polywell Engineering Plastics Co.,Ltd |
|
Verified Suppliers
|
|
|
Production Introduction
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment such as PVC hot and cold mixer,PVC miller and Crusher etc.
The production line is mainly based on various kinds of PVC as raw materials, extrude raw materials with a twin screw extruder, equipped with different sizes and shapes of molds, match with a corresponding calibrating table or cooling tank, hauling machine, cutting machine, and rack, can produce a variety of different plastic profiles. We can customize the production line according to customer samples.
PVC Window Profile Extrusion Machine is bringing in the international advanced technology. It adopts high-efficiency conical double-screw extruder to extrude and vacuum form. It can produce PVC door and window profile, elbowboard, the hanging panel for outside wall, decoration panel, multi-hole wirethrough pipe and other profile. It has been widely used in fields of PVC plastic door and window, construction, decoration, etc.
This line features stable plasticity, high output, low sheering force, long life service, and other advantages. The production line consists of the control system, conical twin-screw extruder, calibration unit, haul-off unit, cutter, film covering machine, and stacked, the extruder is equipped with an advanced AC inverter, imported temperature controller(RKC/OMRON). the calibration unit's vacuum pump and haul-off unit's motors are famous brand products. after a simple changing of the die and screw, it also can produce the foam profiles.
| Feeder | • Screw loader feed material into extruder; |
| Extruder | •World famous brand electrical component: Siemens, Schneider, ABB etc; • High torque gearbox with adopts famour bearing:NSK/SKF etc; |
| Die head | • 3Cr13/3Cr17 material • Adopt to single, co-extrusion, foam imitation marble profile |
| Calibration table | • Include full set of vacuum and water pump • Width: 240mm • Length: 6000mm • Independent operation panel for easy operation |
| Haul off | • Upper/lower tracks driven separately and speed control by
inverter • Fast change type pads for easy operation |
| Cutter | • Lifting saw cutter with adopts double station dust collection
system •Synchronous driving by air cylinder or servo motor control |
| Stacker | • Stainless steel304 as touching material • Discharge driving by air cylinder |
| Model | PW-180 | PW-300 | PW-600 |
| Max.width of product(mm) | 180 | 300 | 600 |
| Extruder model | SJSZ-51/105 | SJSZ-65/132 | SJSZ-80/156 |
| Extrusion capacity(kg/h) | 180 | 250 | 350 |
| Motor power(kw) | 18.5 | 37 | 55 |
| Total length(m) | 18 | 22 | 26 |
| Name | Quantity(set) |
| 300/600 Hot & cold Mixer | 1 |
| screw loader &Feeder | 1 |
| Twin conical screw extruder | 1 |
| Extruding mould | 1 |
| Calibration table | 1 |
| Haul off | 1 |
| Cutter | 1 |
| Stacker | 1 |
| Crusher | 1 |
| Miller | 1 |
Pre-sale service:
To help customers do market research, make project planning, and production line matched requirements analysis.
After-sale service:
To provide installation and test for the machine.
To provide formulas and technology of relevant products.
To provide information on chemical material manufactories.
To provide technical training for clients' employees.
To direct technology aspect of relevant use according to customers' requirements
1. We can provide factory building construction and renovation plan, pipe laying plan in the factory building, circulating cooling pool construction plan, etc.
2. Provide purchasing plans for raw materials, transformers, air compressors, etc.
3. Provide specific formulas of relevant raw materials, excellent raw material suppliers, raw material cost accounting, etc.
4. Provide install equipment, debug equipment, train employees, and provide technical support all year round, etc.
5. We a nationwide plastics industry engineer alliance. If distance permits, we can provide relevant talents to work in your company all year round as technical support.
1. Q: Where is your loading port?
A: Shanghai Port
2. Q: Payment term:
A: T/T, Western Union or cash, etc.
3. Q: Do you have other services for your products?
A: We have rich experience in manufacturing plastic machinery, so we can manufacture various machines according to customers' requirements.
4. Q: How do you quote for customers?
A: The price depends on the quality and performance, but customer satisfaction is the first priority.
5. Q: How many engineers are there?
A: We have 10 professional engineers working and they all have passports.
6. Q: What if the machine is started before delivery? Is it free or do we need to pay?
A: Of course, we have to start the machine for you to check until you are satisfied with our machine and it is free.
7. Q: What is your warranty terms
A: Warranty period: 12 months
Seller shall grant: services and spare parts, free-of-charge service throughout the entire equipment during warranty period.
Long life service: the seller should provide long life service for the sold goods, the buyer pay for needed spare parts after the 12months warranty terms.
8. Q: What is your overseas service?
A: We will provide high quality overseas service ,our technical staff will be able to provide you with technical support, for you personally to overseas assembly and test equipment.
