Wood WPC Plastic PVC Extruder Making Machine Window Sill/ Door Frame Profile

Plastic PVC Wood (WPC) Window Sill/ Door Frame Profile Extrusion/Extruder Making Machine

Production Introduction

PVC Window Profile Extrusion Machine is bringing in the international advanced technology. It adopts high-efficiency conical double-screw extruder to extrude and vacuum form. It can produce PVC door and window profile, elbowboard, the hanging panel for outside wall, decoration panel, multi-hole wirethrough pipe and other profile. It has been widely used in fields of PVC plastic door and window, construction, decoration, etc.

It's mainly used to produce PVC / WPC wall panel, PVC window & door profile, PVC ceiling tile, PVC skirting etc.

It is a kind of high efficiency equipment for plastic extrusion, it is mainly composed by force feeder, soft plasticization screw and barrel, high precision gearbox, exhaust system, it is features of even mixing, better plasticization,stable working, high capacity, and it is suitable for produce PVC products from mixed powder, within different mold and other auxiliary equipments, it can produce plastic pipe, profile, board, sheet, granules, etc.

Advantage of PVC/WPC wall panel:

1.Easy installation, it can be installed directly onto concrete wall

2.No glue, the PVC/WPC wall panel are extruded directly, no glue used. Good for environment.

3.Multiple color choice. The PVC / WPC wall panel apply film lamination, so you can choose design and color which you like.

4. Easy to change. After use several years, if you want to redecorate the house, it is easy to take off from the wall and change to another design.

Work flow and detailed information

Equipment Usage Environment

Equipment usage environment

Power supply: AC380V, 50Hz, three-phase or customized.

Cooling Water hose/pipe: ≤20℃, ≥0.3Mpa, ～4 M3/hr

Ambient temperature: -10ºC-+42ºC

Relative humidity: 40%~90%

Compressed air: working pressure is 0.4 ~ 0.6MPa

Manpower:2 peoples

The PVC Profile production line includes the below machines:

1. PVC Mixer ( for raw material preparation)

2. Conical Twin Screw Extruder

3. Extrusion Mold ( The buyer shall prepare the drawing to make the mold)

4. Vacuum Calibration Table

5. Haul Off and Cutter

6. Crusher and Milling Machine ( for recycle the waste and could reuse for profile production)

Our Service

1. We could send engineers to the buyer's factory for installation instruction, commissioning and training service at buyer's cost.

2. Our machine has one year guarantee since the installation in buyer's factory. During the guarantee time, if any parts (except the easy damaging parts) are damaged under normal operation, we will offer free spare parts. After the guarantee time, we will offer the spare parts with cost price.

3. If the buyer has any problem during the operation, we will offer technical solutions.

The services We Can Provide

1. We can provide factory building construction and renovation plan, pipe laying plan in the factory building, circulating cooling pool construction plan, etc.

2. Provide purchasing plans for raw materials, transformers, air compressors, etc.

3. Provide specific formulas of relevant raw materials, excellent raw material suppliers, raw material cost accounting, etc.

4. Provide install equipment, debug equipment, train employees, and provide technical support all year round, etc.

5. We a nationwide plastics industry engineer alliance. If distance permits, we can provide relevant talents to work in your company all year round as technical support.

FAQ

Q1: What are your strengths?

A1: Suzhou Polywell adopts a unique combination of infrared and hot air heating. The heating method is reasonable, efficient, with good heating effect and stable performance, which makes the adhesion of the reinforcement layer stronger. With mature technology and experienced engineers.

Q2: How will the machine be assembled and debugged when it arrives at the factory, and will the customer's employees be trained?

A2: We will debug the equipment before delivering it to the customer's site. After the debugging is correct, it will be disassembled and sent to the customer's factory. After shipment, we will have experienced engineers on-site to install and assist in debugging. After the on-site installation and commissioning are completed, all-round training will be provided to the customer's employees.

Q3: What do you do if there is a problem or failure with equipment that requires guidance or replacement parts?

A3: If there is a problem, we will provide video technical guidance, and if necessary, we will send engineers to the site to solve the problem. If during the warranty period, parts need to be replaced, we will send spare parts for free. For wearing parts, we only charge the cost fee.

Q4: How long is the warranty period of the product?

A4: We will provide 1 year parts warranty and technical support.

Q5: Can I visit your factory in China?

A5: Yes, our factory is located in Zhangjiagang, Suzhou, near Shanghai. If customers need on-site visits, we can provide airport pick-up for you.

Q6: Can you customize according to requirements?

A6: Suzhou Polywell is committed to differentiated and exclusive customization according to the different needs of customers. Our goal is to pursue efficiency and performance stability. We design machines according to customers' products to meet customers' needs.