Suzhou Polywell Engineering Plastics Co.,Ltd |
Verified Suppliers
|
|
Polyamide Nylon 66, also known as PA66GF25 Pellets, is a strong, high-performance nylon material. This polyamide granules is highly heat resistant, with a melting point between 230-240°C and a temperature of deflection under load of ≥240℃. It also has good abrasion resistance and an impressive impact strength of ≥35 KJ/m2. It is an excellent choice for a variety of applications, from automotive parts to electrical components, due to its high strength and heat resistant properties.
Polywell PA66 Granules Performance Table
NO. | Item | Unit | GB/T 23615.1-2009 | PW-Technical specification |
Material Properties | ||||
1 | Density | g/cm3 | 1.3±0.05 | 1.28-1.35 |
2 | Linear expansion coefficient | K-1 | (2.3-3.5)*10-5 | (2.3-3.5)*10-5 |
3 | Vicat softening temperature | ºC | ≥230ºC | ≥233ºC |
4 | Melting point | ºC | ≥240 | ≥240 |
5 | Testing for tensile cracks | - | No cracks | No cracks |
6 | Shore hardness | - | 80±5 | 80-85 |
7 | Impact strength(Unnotched) | KJ/m2 | ≥35 | ≥38 |
8 | Tensile strength(longitudinal) | MPa | ≥80a | ≥82a |
9 | Elasticity modulus | MPa | ≥4500 | ≥4550 |
10 | Elongation at break | % | ≥2.5 | ≥2.6 |
11 | Tensile strength(transverse) | MPa | ≥70a | ≥70a |
12 | High temperature tensile strength(transverse) | MPa | ≥45a | ≥47a |
13 | Low temperature tensile strength(transverse) | MPa | ≥80a | ≥81a |
14 | Water resistance tensile strength(transverse) | MPa | ≥35a | ≥35a |
15 | Aging resistance tensile strength(transverse) | MPa | ≥50a | ≥50a |
1. Sample water content less than 0.2% by weight.
2. Norm laboratory condition:(23±2)ºC and (50±10)% relative
humidity.
3. The specifications marked with "a" only applies to I-shape strip
otherwise, the specifications concluded between supplier and buyer
through consultation, shall be written in contract or purchase
order.
Specially used in thermal break strips, thermal bridge, heat insulation bar, etc.
Polyamide Nylon 66 provides technical support and services, such as:
Suzhou Polywell Engineering Plastics Company is located in the city of Zhangjiagang, Jiangsu Province, China. Our company has devoted more than ten years to the research and development and production of nylon extruding profiles. According to customer reaction, using our PA66 granules for production can get high yiedl, easy start-up, and get less scrap in the early start-up stage. There will be no lack or incomplete of profiles in the production process, thus avoiding material waste.
Pleass feel free to contact us if you have any questions.
Address:Yangshe Town, Zhangjiagang City, Jiangsu Province, China