Home Companies Team Source Display

1.08 Inch 240x210 Round IPS TFT LCD Display 800 nits TST108103B

Contact Us

[China]

Trade Verify

Address: 606-607, Bld 3A,Hecheng Shiji, Wuhe metro station, Bantian, Longgang, Shenzhen, China

Contact name:Polly

Team Source Display

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

1.08 Inch 240x210 Round IPS TFT LCD Display 800 nits TST108103B

Country/Region	china
City & Province	shenzhen
Categories	Electronics Stocks

Product Details

Description of TST108103B

This display module is a transmissive type color active matrix TFT(Thin Film Transistor) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This module is composed of a TFT LCD module, a driver circuit, and a back-light unit.The resolution of a 1.08" contains 240X210 dots and can display up to 65k colors. The backlight is 800 nits with 2 LEDs. The interface signal is 4 wire SPI. The display mode is normally black, and free viewing angle.

Specification of Ips Lcd Display

LCD type	IPS LCD display
Part No.	TST108103B
Resolution	240x210
Outline dimension	31.28x30.3x1.45mm
Active Area	27.58x24.13mm
Brightness	800 cd/m²
Interface	4 wire SPI
Viewing angle	All o'clock
Operating temperature	-20℃ to +70℃
Storage temperature	-30℃ to +80℃

Feature of IPS LCD Display

Panel Size: 1.08 inch round ips lcd panel

Resolution: 240x210

Interface Type: 13 pins SPI

Viewing Angle: Free

Pixel Arrangement: RGB-stripe

Surface Treatment: Anti-glare

Backlight type: 2 LEDs, 40mA, 3.2V

Color Depth: 65K

Structure: FOG+backlight

Warranty: 12 months

Application of round LCD Display

Smart home, industrial control, consumer electronic product etc

Suggestions on Using LCD Display

1. The LCD screen is made of glass. Don't give excessive external shock, or drop from a high place.
2. If the LCD screen is damaged and the liquid crystal leaks out, do not lick and swallow. When the liquid is attach to your hand, skin, cloth etc, wash it off by using soap and water thoroughly and immediately.
3. Don't apply excessive force on the surface of the LCM.
4. If the surface is contaminated, clean it with soft cloth. If the LCM is severely contaminated, use Isopropylalcohol/Ethyl alcohol to clean. Other solvents may damage the polarizer. The following solvents is especially prohibited: water , ketone Aromatic solvents etc.
5. Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment.
6. Install the LCD Module by using the mounting holes. When mounting the LCD module make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable.
7. Don’t disassemble the LCM.
8. To prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment.
- Be sure to ground the body when handling the LCD modules.
- Tools required for assembling, such as soldering irons, must be properly grounded.
- To reduce the amount of static electricity generated, do not conduct assembling and other work under dry conditions.
- The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated.
9. Do not alter, modify or change the the shape of the tab on the metal frame.
10. Do not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached.
11. Do not damage or modify the pattern writing on the printed circuit board.
12. Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector
13. Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
14. Do not drop, bend or twist LCM.