Active Member
|
[China]
Address: 18F, Building 2, Nantai Yunchuanggu, Phoenix Community, Guangming District, Shenzhen, Guangdong, China
Contact name:Amy
Shenzhen FRIDA LCD Co., Ltd |
|
|
10.1 Inch Lcd Display 1280x800 With Edp Interface 30 Pins 250 Nits
General Description:
The GV101WXM-N81 uses a WLED light-emitting side entry light source (bottom) for backlighting, and the light source has a lifetime of 15K hours. It adopts eDP (1 Lane) signal interface with a total of 30 pins with terminal connection, and the drive screen voltage is 3.3V (Typ.). It has a typical vertical refresh rate Fv of 60Hz.
Specifications:
| Parameter | Specification | Unit | Remarks |
| Active area | 216.96(H) × 135.60(V) | mm | |
| Number of pixels | 1280(H) × 800(V) | pixels | |
| Pixel pitch | 56.5(H) × 169.5(V) | ㎛ | |
| Pixel arrangement | Pixels RGB stripe arrangement | ||
| Display colors | 16.7M(6bits + Hi-FRC) | colors | |
| Display mode | Transmission mode. Normally Black | ||
| Outline Dimension | 228.3× 149.05 × 2.4typ. | mm | |
| Weight | 155(max) | gram | |
| Surface Treatment | HC Glare | ||
| Back-light | Bottom edge side, 1-LED Lighting Bar Type | 36* LED Array |
Absolute Maximum Ratings:
| Parameter | Symbol | Min. | Max. | Unit |
| Power Supply Voltage | VDD | -0.3 | 4.2 | V |
| Logic Supply Voltage | VIN | Vss-0.3 | VDD+0.3 | V |
| Operating Temperature | TOP | 0 | +50 | ℃ |
| Storage Temperature | TST | -20 | +60 | ℃ |
Electrical Specifications:
| Parameter | Min. | Typ. | Max. | Unit | Remarks | |
| Power Supply Voltage | VDD | 3.0 | 3.3 | 3.6 | V | |
| Power Supply Current | IDD | - | 212 | 272 | mA | |
| Positive-going Input Thresh old Voltage | VIT+ | - | - | 100 | mV |
Vcm = 1.2V typ. |
| Negative-going Input Thresh old Voltage | VIT- | -100 | - | - | mV | |
Differential Input Voltage | VID | 380 | - | 1200 | mV | |
Power Consumption | PD | - | 0.7 | 0.9 | W | white pattern |
PBL | - | 1.8 | 1.84 | W | W/I Driver | |
Ptotal | - | 2.5 | 2.74 | W | ||
Interface Connection:
| Terminal | Symbol | Functions |
| Pin No. | Symbol | Description |
| 1 | NC | NC |
| 2 | GND | Ground |
| 3 | EDP-RX1N | eDP RX channel 1 negative |
| 4 | EDP-RX1P | eDP RX channel 1 positive |
| 5 | GND | Ground |
| 6 | EDP-RX0N | eDP RX channel 0 negative |
| 7 | EDP-RX0P | eDP RX channel 0 positive |
| 8 | GND | Ground |
| 9 | AUX-P | eDP AUX CH positive |
| 10 | AUX-N | eDP AUX CH negative |
| 11 | GND | Ground |
| 12 | VDD | Power Supply, 3.3V |
| 13 | VDD | Power Supply, 3.3V |
| 14 | BIST | Aging Mode Power Supply |
| 15 | GND | Ground |
| 16 | GND | Ground |
| 17 | HPD | HPD |
| 18 | LED_GND | LED_GND |
| 19 | LED_GND | LED_GND |
| 20 | LED_GND | LED_GND |
| 21 | LED_GND | LED_GND |
| 22 | LED_EN | LED_EN |
| 23 | LED-PWMIN | LED PWMIN |
| 24 | NC | NC |
| 25 | NC | NC |
| 26 | VLED | LED Power Supply (4.5V - 12V) |
| 27 | VLED | LED Power Supply (4.5V - 12V) |
| 28 | VLED | LED Power Supply (4.5V – 12V) |
| 29 | VLED | LED Power Supply (4.5V - 12V) |
| 30 | NC | NC |
Optical Specification:
| Parameter | Symbol | Condition | Min. | Typ. | Max. | Unit | |
Viewing Angle range | Horizontal | Θ3 |
CR > 10 | 80 | 85 | - | Deg. |
| Θ9 | 80 | 85 | - | Deg. | |||
| Vertical | Θ12 | 80 | 85 | - | Deg. | ||
| Θ6 | 80 | 85 | - | Deg. | |||
| Color Gamut | - | 50 | - | % | |||
| Luminance Contrast ratio | CR | Θ = 0° | 600 | 800 | - | ||
| Luminance of White | 5 Points | Yw |
Θ = 0° | - | 250 | - | cd/m2 |
White Luminance uniformity | 13 Points | ΔY5 | 62.5 | 71.4 | - | ||
White Chromaticity | Wx | Θ = 0° | Typ. -0.03 | 0.313 | Typ.+0.03 | ||
Wy | 0.329 | ||||||
Reproduction of color | Red | Rx |
Θ = 0° |
Typ. -0.03 | 0.590 |
Typ. +0.03 | |
| Ry | 0.353 | ||||||
| Green | Gx | 0.326 | |||||
| Gy | 0.570 | ||||||
| Blue | Bx | 0.157 | |||||
By | 0.116 | ||||||
| Response Time (Rising + Falling) | TRT | Ta= 25℃ Θ=0° | - | 30 | - | ms | |
| Gamma Scale | 2.0 | 2.2 | 2.4 | ||||
| Cross Talk | CT | Θ = 0° | - | - | 2.0 | % | |
Handling Precautions:
1.Do not display the fixed pattern for a long time because it may develop image sticking due to the LCM structure. If the screen is displayed with fixed pattern, use a screen saver.
2.To prevent modules from degradation, do not operate or store them exposed directly to sunshine or high temperature/humidity for long periods.
