Gester International Co., Ltd |
|
SATRA TM161 Footwear En Shoe Sole Bending Flexing Resistance Tester
Application
This tester is used to measure the flexing resistance of shoe soles under continuous movement. Before test, plunge some holes at the maximum bending position, and mount specimen at both grips, one fixed, one movable. Specimen runs flexing owing to the movement of machine. After a certain test cycles, remove the specimen and check its difference of incision length.
Standards
SATRA TM161, ISO 17707, ISO20344 section8.4.2 ,
ISO20347 section 5.8.4, AS/NZS 2210.2 section8.4.2
GB/T 20991section8.4.2, QB/T 2885, DIN 53543
Key Specification
Model | GT-KB06A | GT-KB06B |
Test position | 3 | 6 |
Bending angle | 90±2 ° | |
Bending speed | 125-150cpm | |
Mandrel diameter | 30 mm | |
Clamps apart | 110±1mm | |
Movable fixture stroke | 41.5 ± 0.5 mm | |
Counting | LCD, 0-9999999 | |
Power supply | 1∮AC 220V 50/60HZ | |
Dimensions | 105x42x55cm | 105x70x55cm |
Weight | 80kg | 100kg |
Accessories
Standard accessories | 1set | Spanner |
1pcs | Chisel cutter(2mm) | |
1pcs | Power line |