Home Companies Perfect International Instruments Co., Ltd

SUS#304 Stainless Steel 150L Environmental Test Chamber / Temperature Humidity Tester

Perfect International Instruments Co., Ltd

Contact Us

[China] country

Trade Verify

Address: 150 Fenxi Road, Shangjia Urban Industrial Park, Building 2, Wanjiang District, Dongguan City, Guangdong Province

Contact name:Michael Chan

Inquir Now

Perfect International Instruments Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

SUS#304 Stainless Steel 150L Environmental Test Chamber / Temperature Humidity Tester

Country/Region china
City & Province dongguan guangdong
InquireNow

Product Details

150L Inner Test Size Environmental Test Chamber , 150 Degree Temperature Humidity Tester

 

Machine Purpose:

150L Inner Test Size Environmental Test Chamber , 150 Degree Constant Temperature Humidity Tester is mainly used for products in accordance with the requirements of national standard or user-defined requirements, at low temperature, high temperature, humidity and temperature cycling conditions, physical and other relevant characteristics of the product environmental simulation test, after tested by detecting to judge the performance of the product, it is still able to meet predetermined requirements in order for the product design, improvement, identification and factory inspection use.

 

Special noted : standard machine can be low temperature -70℃, highest tempeature 150℃ , humidity 20% to 98%R.H, if customer need it over 150℃, such as 180℃, 200℃, or humidity 10%RH, 5%RH,  it is more expensive than standard machine, please tell us before quote

 

Specifications of 150L Chamber :

Model No.PT-2091B
Inner Cabinet50*50*60cm (W*D*H)
Temperature Range
  • -20℃ ~ 150℃,
  • -40℃ ~ 150℃,
  • -70℃ ~ 150℃,
Humidity Range20%R.H ~ 98%R.H
Temperature Fluctuation (℃)±0.5℃
Temperature uniformity (℃)≤ ±2℃
Humidity fluctuation (%RH)±2.5%RH
Humidity uniformity (%RH)
  • > 75%RH: ≤+2, -3%RH;
  • <75%RH: ≤±5%RH
Heating rate (℃)3℃/min (No-load)
Cooling rate (℃)0.7 ~ 1℃/min (No-load)
Temperature and humidity control systemImported LCD digital display controller.
Heated Humidification systemNichrome wire-efficiency heater, UL-shaped stainless steel plating heater
Cooling System
  • Compressor: French imported hermetic compressors.
  • Refrigerant: Environmentally friendly refrigerant R404A, the destruction of the ozone layer was 0 (ODP = 0.00).
  • Condenser: Fin-type with the cooling motor.
  • Evaporator: Fin-type multi-stage automatic load capacity adjustment.
  • Other accessories: Desiccant, repair valves, solenoid valves in Japan.
  • Expansion systems: Capacity automatic control throttling of the refrigeration system.
Inner MaterialSUS#304 stainless steel.
Outer MaterialSpray color galvanized steel sheet.
Insulation MaterialsUltra-fine glass fiber insulation cotton.
CommunicationEquipped with a standard RS232C / RS485 communication interface, the maximum transmission distance of 1.2Km, the fastest communications up to 9600bps, can be realized with a computer connected to the remote monitoring, easy to operate.
Subsidiary functionFault alarm and reason prompts, you can change the name of the fault, the upper temperature limit protection, timing and the reservation (automatic stop and start function), multiple (up to 6 groups) PID temperature control separate segments, curve display and save the function display PV curve 0-8 days. Temperature can be set according to the linear operation (liters can set per hour up / cooling rate).
Standard configuration
  • Power cable 4.0 mm² x 5 cores, low-impedance rubber cable 3m x 1.
  • SUS # 304 square punching stainless steel shelf x 2.
  • Stainless steel adjustable shelf track pitch of 2 groups.
  • An energy-efficient lighting.
  • Machine left Փ50mm a test hole attached stainless steel manhole cover, and with a silica gel plug.
  • Standard Test Meteorological gauze Volume x 1.
  • Fuse set x 1 set (wearing parts).
  • Operation Manual x 1.

 

Main Features:

 

  • Under same volume have a larger place space and load heat.
  • Using US new PWM refrigerant control technology to achieve low energy-saving operation.
  • To prevent test samples will not dew condensation control conditions.
  • Communication configuration RS232 interface and USB storage download functions.
  • Machines with multiple alert monitor, configure the wireless remote alarm functions.
  • The safest water systems and renewable water loop circulation system.
  • Humidity Effects can reach 15℃ / 5% RH performance, dehumidification speed fast.
  • To prevent static electricity-saving ability to achieve the industry's best performance.

 

 

Refer Picture for 150L Temperature Humidity Chamber :

 

Hot Products

Accuracy 0.5% Tensile Testing Equipment Electric Universal Material Testing Machine UTM Introduction ...
Min Test Value 0.05g Professional Universal Tensile Testing Machine With 360 Degree Rotate Use: This ...
Max Test Stroke 250mm High Precision Release Force Tester Use : PT-6089 release force tester is our ...
Accuracy ±0.5% Servo Motor Dual Display Dual Control Material Strength Testing Machine PT-1176S ...
-40℃~200℃ High Low Temperature Tensile Testing Machine With Tensile Testing System Machine ...
ISO Approved -40℃~200℃ High Low Temperature Tensile Testing Machine With Tensile Testing System ...