Active Member
|
[China]
Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong
Contact name:Kris
Guangdong ALI Testing Equipment Co,.Ltd |
|
|
Solid Particulate Protection Test Box Protective Suit Solid
Particulate Tester
Application:
It is used to test the inward leakage rate of particulate chemical
pollution in the overall protective clothing in the workplace
environment.
Standard:
GB / T 29511-2013, BS EN 1SO13982
Technical Parameters:
Test environment requirements:
1. Ambient temperature (20 ± 5) OC, relative humidity <60%
2. ≥400 × 500 × 300cm use space, with good drainage and ventilation
NaCl particle aerosol generator:
| Laskin nozzle Number | 2x6 = 12 (two atomizing barrel distribution) |
| Aerosol substance | NaCl |
| Aerosol particle size distribution | ≤1μm |
| Aerosol concentration | 0 ~ 1 * 1012P / L |
| Spray pressure | 0 ~ 60kpa adjustable |
| The occurrence amount | ≥110 L / min |
(2). Particle concentration detector 2 sets 4 channels
Dynamic range (0.001 ~ 200) mg / m3, accuracy ± 1%, response time
≤500 ms
(3). Horizontal foot drive test bench
Running speed (5 ± 0.5) km / h
(4). Air duct circulation and maintenance cleaning device
Control analysis system:
1. Centralized console, PC computer program control and promptly
complete the entire test process
2. Automatically monitor the test data, automatically calculate the
results of the experimental single internal leakage rate, total
inward leakage rate, average total inward leakage rate and other
experimental results, and output the experimental results in
multiple ways.
Technical Parameters:
| Model | GSKA-10001 |
| Inner Dimensions(cm) | Customers designated space size and design |
| Temperature Range | RT+10℃~80℃(80℃ ~150℃ is optional) |
| Indication Resolution / Distribution Uniformity of Temperature | 0.1℃ /±2.5℃; |
| Control Accuracy of Temperature | ±0.5℃; |
| Temperature Rising Speed Rate | Temperature rising speed: approx. 0.1~3.0 (℃/min) |
| Cooling System | Refrigeration by compressor, according to customer’s requirements |
| Protection Devices | Fuse-free switch, overloading protection switch for compressor, high and low voltage coolant protection switch, over-temperature protection switch, fuses, fault warning system |
| Optional Accessories | Slope for cart , Recorder |
| Compressor | French Tecumseh Brand, Germany Bizer Brand |
| Power | AC 380 V,50/60HZ ,3∮ 5 Lines |
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Do you have any question please contact with us for
this Climatic Programmable Walk In Stability Chamber BS ASTM
Standard,thank you
