Home Companies Guangdong ALI Testing Equipment Co,.Ltd

Temperature Resolution 0.01℃ Environmental Stress Screening Chamber OEM

Active Member

Contact Us

[China]

Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong

Contact name:Kris

Guangdong ALI Testing Equipment Co,.Ltd

Temperature Resolution 0.01℃ Environmental Stress Screening Chamber OEM

Country/Region	china
City & Province	dongguan guangdong
Categories	Other Security & Protection Products

Product Details

Temperature Resolution 0.01℃ Environmental Stress Screening Chamber OEM

Equipment Overview:

This system is composed of conditioning chamber, dry heater, evaporator (refrigeration), humidifier extension pipe, centrifugal fan, etc. The purpose is to adjust the dry temperature and humid air in the conditioning chamber after sufficient mixing, and sent into the working chamber, enter into the return air vent, sent back to the adjustment cavity to continue the cycle, repeating the cycle.

Adopting the air-flow spray method and the principle of siphon, the absorbed salt solution is atomized through the nozzle, and the atomization particle size is uniform, which can ensure the continuity and stability of the test.

Complied Standards & Clauses:

This walk-in comprehensive salt spray test chamber can perform neutral salt spray test (NSS), acetic acid salt spray test (ASS), copper accelerated acetic acid salt spray test (CASS) according to GB/T10125－2012, ASTM B117-2002, BS7479:1991, cyclic corrosion test can also be carried out according to IEC 60068-2-52 kb test, GM9540P, PV1210 and other standards.

This test chamber meets the requirements of ES 5454, GJB150A, ASTM B117, ASTM B368, ASTM B380, ASTM D1735, ASTM D2247, ASTM G85 A1, GM4465P, ISO9227, DIN 50021, PV1210, NES M0007, 33 (CCT-1 method),etc.

Technical Parameters:

1. Inner chamber capacity	5.4 cubic meters Can be customized
2. Inner chamber size	150015002400mm (WDH) Can be customized
3. Outer dimensions	180020003000mm (WDH) Subjected to actual design
4. Temperature range	15℃～70℃ (Adjustable)
5. Temperature accuracy	Temperature resolution: 0.01℃
	Temperature uniformity: ≤2℃
	Temperature fluctuation: ±0.5℃
6. Heating and cooling rate	Heating up: 15℃～+60℃≤50min, Cooling down: +60℃～15℃≤70min,
7. Humidity range	50%～98%R.H.
8. Humidity deviation	±3%R.H(>75%R.H) ±5%R.H(≤75%R.H)
9. Spray volume	1.0～2.0 mL/80cm2/H (collect at least 16 hours, take the average value)
10. Spray pressure	1.00±0.01kgf/cm2
11. PH value of potion	Neutral 6.0～7.0; Acidic 3.0～3.1
12. Spray solution	PH value: Neutral 6.5～7.2; Acidic 3.1～3.3
13. Time range	1S ～ 9999H, the time can be set arbitrarily
14. Neutral salt water spray test temperature	Test room: 35℃±1℃, saturated air barrel: 47℃±1℃
15. Drying test temperature	Laboratory temperature: 50~70℃±2℃, humidity: less than 30%±3%RH
16. Wetting test	Laboratory temperature: 40~50℃±2℃, humidity: more than 93%RH, adjustable
17. Room temperature maintenance	Keep the laboratory temperature at 25℃±1℃
18. Inner chamber material	10MM thick PP plastic board
19. Outer chamber material	10MM thick PP plastic board
20. Door opening size	The gate is set in the depth direction and adopts a single door structure, size: 1100×1500mm (W*H, the size can be adjusted)
21. Observation window	There is an observation window (size: 300×400 mm (W*H), which can be adjusted) on the door, it is the hollow resistive film heating and anti-frost observation window
22. Product weight	Approx. 1000 Kg
23. Product power supply	Three-phase five-wire, 20KW
24. The internal design of the salt spray chamber	The top design and the condensate on the inner wall will not drip on the test sample (slope structure is adopted)