Active Member
|
[China]
Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong
Contact name:Kris
Guangdong ALI Testing Equipment Co,.Ltd |
|
|
Intelligent High Precision Test Chamber With Digital Display OEM
The characteristics of:
1, the experimental equipment has excellent function, beautiful
appearance, good reliability, and is the first choice of laboratory
environment experimental equipment.
2. The inner liner of the box is made of stainless steel plate, and
the outer shell is sprayed with imported steel plate. The sealing
strip in the box is made of imported silicone rubber with high and
low temperature resistance, and the sealing and insulation function
is excellent.
3, the common BTC balance temperature regulation method, stable and
balanced heating ability, conditioning aspiration temperature
environment, high precision, high stability temperature control.
4, with the setting value of the temperature automatically select
operation refrigeration circuit function, simple operation.
5, intelligent high precision digital display PID microcomputer
temperature control instrument, film button, touch setting, digital
and straight
6, with hollow special high temperature resistant, low temperature
conductive heating glass window, high brightness cold light source
lighting, can observe the sample at any time.
Working Principle:
This is so called Fast Shipping Thermal Shock Test Chamber, Thermal
Chamber, Thermal Shock Chamber.
Sample is placed in the test chamber, more extreme temperature than
test temperature can be set in high-temperature chamber and
low-temperature chamber. When it comes to low temperature test,
cold chamber door open, and low-temperature chamber working
together with test chamber.
When converted into high-temperature test, cold chamber door
closed, hot chamber door are opened, and test chamber working
together with high-temperature chamber.
Conversion of mechanical action (transferring from high temperature
to low temperature or low temperature to high temperature) can be
completed in less than 1second, and the temperature can be quickly
stabilized. During the whole test, test sample is no need to be
moved, and without any human intervention.
| Shock Temperature ragne | -65°C~150°C |
| Heating up time | RT~200°C about 35min |
| Cooling down time | RT~-70°C about 90min |
Temp recover time/ | ≤5min / ≤10sec |
| Temp control accuracy/ | ±0.5°C / ±2.0°C |
| distribution accuracy | |
| Inner materials | SUS 304# stainless steel plate for inner chamber,and stainless steel plate |
| + spray painting for external chamber. | |
| Insulation materials | High-temperature high-density amino acid ethyl ester foam insulator material. |
| Systems | P.I.D+S.S.R+Microcomputer balanced temperature control system. |
| Cooling systems | Semi-hermetic two-stage compressor (water-cooled) / |
| hermetic two-stage compressor (air-cooled). | |
| Safety devices | Fuse switch, high and low pressure protection switch compressors, |
| refrigerant pressure protection switch failure warning system, electronic siren. | |
| Fitting | Outlook window (special purchase), the upper and lower adjustable |
| compartment two energized measured line hole, casters,level bracket. | |
| Power | 3 phase AC380V 50HZ/60HZ |
| Controller | Tanwan TATO or TH900C |
| Compressor | Germany / Bock Brand |
GB11158 GB10589-89 GB10592-89
GB/T10586-89 GB/T2423.22-2001 GB/T2423.1-2001
GB/T2423.2-2001 GB/T2423.3-93 GB/T2423.4-93
ASTM D1735 EIA - 364-59 IEC60068-2-1.1990
A humidity chamber is a mechanism that examines how products react
when exposed to variations in humidity. This type of environmental
testing is used by manufacturers to test the various parameters of
their products in the harshest of conditions.
The purpose of humidity chambers is to test the influence of
varying environments on products to determine the length of their
usefulness and at what point they will fail. The collected data
assists engineers in adjusting their designs and selecting more
resilient materials.
The different varieties of humidity chambers allow testing to be
completed in a static or dynamic state depending on the required
data and the type of product. Humidity chambers are used as
extended testing chambers to determine a specimen‘s reaction to
elevated moisture conditions when exposed for weeks or months.
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
- A variety of industrial and laboratory drying ovens;
- Muffle and chamber furnaces;
