Guangdong ALI Testing Equipment Co,.Ltd |
225L Climatic Test Chamber High Temperature Resistant High Density
Ethyl Chloroformate Foam
Box structure
1. The box body is processed and formed by CNC machine tools, with
beautiful appearance and non-reaction handle, which is easy to
operate.
2. The inner tank of the box is made of imported high-grade
stainless steel (SUS304) mirror panel, and the outer tank of the
box is sprayed with A3 steel plate, which increases the appearance
texture and cleanliness.
3. The water replenishment tank is placed in the lower right part
of the control box, and has automatic water shortage protection,
which is more convenient for the operator to replenish the water
source.
4. The large observation window is equipped with lights to keep the
inside of the box bright, and the tempered glass embedded in the
heating body is used to clearly observe the situation in the box at
any time.
5. The humidification system pipeline is separated from the control
circuit board, which can avoid failure due to water leakage in the
humidification pipeline and improve safety.
6. The water system pipeline circuit system is convenient for
maintenance and repair.
7. The box insulation adopts ultra-fine glass fiber insulation
cotton, which can avoid unnecessary energy loss.
The left side of the box is equipped with a test hole with a
diameter of 50mm, which can be used for external test power lines
or signal lines.
Product Name | Climatic Test Chamber |
Inner box size W*H*D(cm) | 50*75*60 |
Carton size W*H*D(cm) | 107*161*117 / customized |
Inner box volume | 225L |
Temperature and humidity control range | A:-20℃~150℃ B:-40℃~150℃ C:-60℃~150℃ D: -70℃~150℃ (Special
temperature and humidity specifications can be customized) |
Temperature and humidity fluctuation | ±0.5℃;±2.5%RH |
Temperature and humidity deviation | ±0.5℃-±2℃;±3%RH(>75%RH); ±5%RH(≤75%RH) |
Controller resolution | ±0.3℃;±2.5%RH |
Controller Brand | Programmable Korea TEMI880 touch screen controller |
Inner wall | SUS304#steel plate |
Outer wall | SUS304#steel plate mist treatment |
Thermal insulation material | High temperature resistant high density ethyl chloroformate foam
insulating material |
System air circulation mode | Centrifugal fan-broadband forced air circulation |
Cooling mode | Single stage mechanical compression system |
Refrigerating machine | Fully enclosed piston French Taikang compressor |
Refrigerant | R404A or American DuPont environmental refrigerant (R23+R404) |
Condensation method | Air-cooled |
Heater | Ni-Cr wire heater |
Humidifier | Semi-closed steam humidification |
Water supply mode | Automatic circulating water supply |
Safety device | No fuse switch,( compressor overload, refrigerant high and low
pressure, ultra-humidity and over-temperature) protection switch, fuse failure warning system) |
Power | 220V AC±10% 50HZ |
Environmental testing
Companies in all industries—but especially those that produce
electronics, medical devices, automobiles, and anything that
operates with a lithium-ion battery—put their products and
components that make up those products through rigorous
environmental tests. These diagnostics simulate conditions to
identify weaknesses in designs and set expectations (hence those
warranties) for customers.
This is completed with the use of environmental test chambers. Here’s everything you need to know about test chambers: the different types of models, how they work, use cases, and more.
Product Usage
This series of products is suitable for aerospace products,
information electronic instruments, materials, electrical,
electronic products, and various electronic components to test
their performance indicators in high and low temperature or humid
and hot environments.
Standard Compliance:
1. IEC68-2-1 Environmental testing - Part 2: Test methods - Tests A: Cold
2. IEC68-2-2 Environmental testing for electric and electronic products Test methods - Tests B: Dry Heat
3. IEC68-2-3 Environmental testing for electric and electronic products - Part 2: Testing method test Cab: Damp heat Steady state
4. IEC68-2-30 Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat,cyclic ( 12h+12h cycle)
5. IEC68-2-14 Environmental testing for electric and electronic products-Part 2:Test methods-Test N:Change of temperature
6. MIL-STD-810D High temperature test
7. MIL-STD-810D Low temperature test
8. MIL-STD-810D Damp heat test
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency