Home Companies Guangdong ALI Testing Equipment Co,.Ltd

Corrosion Resistant Salt Spray Test Chamber 86Kpa-106Kpa Antirust

Active Member

Contact Us

[China]

Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong

Contact name:Kris

Guangdong ALI Testing Equipment Co,.Ltd

Corrosion Resistant Salt Spray Test Chamber 86Kpa-106Kpa Antirust

Country/Region	china
City & Province	dongguan guangdong

Product Details

Corrosion Resistant Salt Spray Test Chamber 86Kpa-106Kpa Antirust

Salt spray test system has the following characteristics:

1. Controller: Controller imported from Korea "TEMI-880" 16-bit true color touch screen, the program group of 1,20 groups, the total number of cycles 1200 times.

2, the temperature sensor: anti-corrosion platinum resistance PT100Ω / MV

3, heating method: using titanium high-speed heating heater, multi-point layout, good stability and uniformity

4, spray system: tower spray system, advanced quartz nozzle, no crystallization for a long time, fog particles are evenly distributed

5, salt collection: in line with the national standard funnel and standard measuring cylinder, adjustable settlement controllable

6, bipolar decompression, to ensure that the spray pressure stability.

Features:

1. Adopt automatically add water system, can watered by itself while lack of water.

2. Precise glass spray nozzle, good uniformity, mist dropping naturally, no Na-Cl crystallized salt.

3. Double over-heat protection devise and alarm when water short storage to ensure use safety.

4. Digitally temperature controller, PID controlled.

5. Tapered Spray tower, even mist dropping.

6.Applicable fields including automobile parts, aviation equipment, photographic equipment, building materials, electricity,
electrical and electronic systems.

7. Comply with ASTM B-287, JIS D-0205, H-8681, Z-2371, K-5400,etc.

specification:

Volume(L)		108	270	480	customi-zable
Internal Size W×H×W(mm)		600×400×450	900×500×600	1200×500×800
External Size W×H×W(mm)		1150×1090×672	1450×1200×842	2080×1285×1240
Performance Index	Temperature Range	LaboratoryTemperature Range :RT~50℃ Saturated air barrelTemperature Range :RT~63℃
	Temperature Deviation	±1.0℃
	Temperature Uniformity	≤2.0℃
	Temperature Fluctuation	±0.5℃
	Heating Rate	Test Room RT→+50℃≤60 min Pressure Barrel RT→+63℃≤60 min
	Salt fog deposition	1~2ml/80 square meter (At least 16 hours were collected and averaged)
	Spray Pressure	70~170Kpa
	Spraying Mode	Continuous spray
	Test time	1~999(S,M,H)adjustable
	PH	6.5~7.2 3.0~3.2
Main Part	Control System	temperature controller
		PT100 thermocouple (armor), PID control
	Spraying System	The Nozzle is made of special glass material, the size and angle of spray can be controlled
		operate manual spray or set automatic spray according to program
Structural Features	Material Enclosure	Imported PVC polyethylene board is adopted
	Medicament refill cylinder	hidden type supplementary water gauge
	Pressurized air drum	SUS304# stainless steel high-pressure barrel
	Test Rack	The plane indexing frame can be used to adjust the Angle of fog falling or being foggy at any direction
	Cover Material	imported European acrylic board
	Spray Tower	air atomizing nozzle, height can be adjusted
	Spray volume collector	Cone funnel with diameter of 100mm
	Heating System	Titanium alloy heat pipe, steam heating, P.I.D. control heating
	Brine Tank	Made of PVC board
	Saturated air barrel	SUS304 Stainless
	Drain line	acid and alkali resistant PVC piping
	Heater	Titanium alloy armored electric heating tube (test chamber bottom heating) SUS316# stainless steel armoured heating tube (saturation barrel)
Standard Fittings		1 set of nozzles, 2 fog collecting and measuring cylinders, 2 fog collecting collectors, etc.
Safty Device		Leakage, short circuit, motor overheating, overload, over current protection
Supply Voltage		AC220V 50Hz
Environment Requirement		Temperature 5.0~+30.0℃, Humidity≤85%RH, Air Pressure 86Kpa~106Kpa