Active Member
|
[China]
Address: Room 401, Building 3, No. 10, Longxi Road, Nancheng Street, Dongguan, Guangdong
Contact name:Kris
Guangdong ALI Testing Equipment Co,.Ltd |
|
|
ODM Electrodynamic Vibration Testing Machine 200Hz Aluminium Material
Shock Test Machine:
The impact test system is designed for electronic components, instrumentation and mechanical products to provide simulation of the impact of environmental testing equipment, is mainly used in electronic products, aerospace, marine, military, automotive components, transportation and other areas of the impact test . The product in the transport, use the process to withstand the extent of the impact of damage can be completed half sine wave (basic waveform), after the peak Sawtooth wave, trapezoidal wave; three kinds of pulse impact test in line with GB (GB), GJB (national military standard) and Mil (US military standard) on the impact of the relevant test requirements.
Application:
Electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. Sine wave, FM, sweep, programmable, frequency multiplier, logarithm, maximum acceleration, amplitude modulation, time control, full function computer control, simple fixed acceleration/fixed amplitude. Equipment through continuous failure to run 3 months of testing, stable performance, reliable quality.
Features:
1. Set way: Chinese and English menu, computer operation, the use of specialized monitoring and control systems, the data of the whole process can be handing and output.
2. Display functions: dynamic display test curves, multi-Dan, on the number of data.
3. Curve recorder:real-time record of the test data, test data automatically, the test results can be stored, printed.
Specification:
| Vibration Testing Machine | ||
| Sine thrust | 600kgf | |
| Random thrust | 600kgf | |
| Impact thrust | 1200kgf | |
| Frequency Range | 5～2000Hz | |
| Continued displacement | 51mm | |
| The impact of displacement | 51mm | |
| Maximum speed | 2m/s | |
| Maximum acceleration | 981m/s2 | |
| Moving coil diameter | Φ150mm | |
| Allow eccentric moment | ＞190N.m | |
| Load connection point | 6 piont | |
| Equivalent mass of moving parts | 6kg | |
| Countertops screw size (standard) | M8 | |
| Screw layout table (diameter, circumference) | 8 on Φ100mm,8 on Φ,200mm. | |
| Axial isolation frequency | ＜3Hz | |
| Maximum load | 120Kg (customer request 45Kg) | |
| Magnetic flux leakage | ＜1mT | |
| Dimensions (without packaging)(L×W×H) | 1600mm×985mm×850mm | |
| Vibration table Weight | 1850kg | |
| Amplifier output | 8kVA | |
| SNR | ＞65dB | |
| System Protection | The entire power amplifier has: Grid overvoltage, undervoltage power grid phase, logical failure, power module protection, power module temperature, output overcurrent, output overvoltage, power supply, displacement units, units body temperature, external linkage, etc. protection circuit, when any fault occurs, turn off the output, sound and light alarm. In addition to the above protection, it also has a protective function RMS values of tolerance protection, emergency stop devices, such as improving running. | |
| Rated output voltage | 120Vrms | |
| Amplifier efficiency | ＞95% | |
| Fan | ||
| Power | 0.75kW | |
| Airflow | 0.3m3/s | |
| Duct diameter | 120mm | |
| Pressure | 0.048kgf/cm2 | |
| Vertical extension table | ||
| Table size | 600mm×600mm | |
| Equivalent mass | 23kg | |
| Upper frequency | 2000Hz | |
| Countertop Materials | Aluminium | |
| Horizontal slide | ||
| Table size | 600mm×600mm | |
| Thickness | 30mm | |
| Countertops weight | 36kg | |
| Frequency | 2000Hz | |
| Bearing number | 1 | |
| Bearing weight | 0.58kg | |
| Connector Weight | 1.4kg | |
| Maximum Load | 300kg | |
| Countertop Materials | Aluminium | |
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
More produced:
