|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
Description
The Programmable 210L Thermal Shock Environmental Chamber is an environmental test equipment used to test material structures or composite materials.
The thermal shock test chamber is widely used in the environmental test of plastic, rubber, metal, electronic devices and other materials or products (or semi-finished products), and can greatly change the ambient temperature of the test sample in the shortest time.
Parameter
| Name | Programmable 210L Thermal Shock Environmental Chamber | ||||
| Model | TS-340 | ||||
| Inner dimensions of test room (mm) | 450*450*360 | ||||
| Volume of test room (mm) | 72L | ||||
| Load of test room | 30kg | ||||
| Overall dimensions(mm) | 1710*1020*1845 | ||||
Pre-heat room
| Upper limit preheat temperature | +220℃ | |||
| Heating time | Ambient temperature to ~ + 200℃, within in 30 minutes. | ||||
Pre-cool room | Lower limit pre-cool temperature | -75℃ | |||
| Cooling time | Ambient temperature to ~ -70℃, within in 30 minutes | ||||
| Test room | High temperature exposure range | Ambient temperature +20 to +200°C | |||
| Low temperature exposure range | –65 to -5°C | ||||
| Recovery time | Within 15 minutes | ||||
| Temperature fluctuation | ≤±0.5℃ | ||||
| Temperature deviation | ≤±3 ℃ | ||||
| Controller | Programmable color LCD touch screen controller | ||||
| Cooling system | Mechanical compression refrigeration system | ||||
| Refrigerating unit | French TECUMSEH compressor | ||||
| Refrigerant | R404A, R23 | ||||
| Air circulation | Centrifugal wind fan | ||||
| Exterior material | Steel Plate with protective coating | ||||
| Interior material | SUS304 stainless steel | ||||
| Power Supply | 380V 50HZ | ||||
| Environmental conditional | 5℃～+40 ℃ ≤85% R | ||||
Advantage
 |  |
| Test Area | Cable Hole |
There are 2 Types of Thermal Shock Test Chamber
●2 zone thermal shock chamber
Divided into hot and cold areas, the change of high temperature and low temperature is mainly through the basket to move the sample between the hot and cold areas.
●3 zone thermal shock chamber
The sample is statically prevented, the studio will be pre-cooled and pre-heated
 |  |
