Xi'An LIB Environmental Simulation Industry |
Verified Suppliers
|
|
IPX7 Test Equipment
Description
IPX7 test equipment is designed according to IEC60529 clause 14.2.7
regarding the second characteristic numerals 7.
Waterproof test simulates the condition of raining, which is mainly
applied to electronic products, luminaire. electric components,
motor and house holding appliance.
ipx7 ipx8 test tank can help to judge the products' performance,
and provide the basis for design, improve and inspect. " The
water-level on enclosure recuires 0.15m above top and 1m above
bottom. duration of the test is 30min.
Main Technical Parameter
Name | IPX7 Test Equipment |
Internal dimension | Diameter 600mm *Height 1500mm. |
Chamber material | SUS#304, thickness 2.5mm |
Water depth | Simulate 50m depth by air compressor |
Water pressure | Ambient to 0.5MPa, pressure gauge accuracy 0.25 degree |
Timer | 0 ~ 99min, 99sec |
Sample lift device | Portable stainless steel basket |
Water level display | Water pipe with scale |
Open mode | pneumatic lift with safety lock. |
Protection device | Pressure protection and anti-explosive device, water drain and pressure release device |
Safety protection | Power overload protection, short circuit protection, grounding protection, alarm display |
Nominal power | 3500W |
Power Supply | AC380V 50HZ |
Configuration
Test Area | Footstand |
Control Panel | Safe Lock |
IPX7
Method name: Short time immersion test.
Test equipment and conditions: Immersion tank. The dimensions shall
be such that the sample shall be placed in the immersion tank at a
distance of at least 1m from the bottom of the sample to the
surface of the water. The distance from the top of the sample to
the water surface should be at least 0.15m.
Testing time: 30 min.
IPX8
Method name: Continuous diving test.
Test equipment, test conditions and test time: The severity shall
be higher than IPX 7 as agreed by the buyer and the seller.
Note: Many outdoor electronics also emphasize the ability to float.
Features
For IPX7 testing
●Ipx8 immersion test tank adopts double-laver structure and made by
SuS304 stainless steel, to make sure rustless for long time use..
●Inlet and outlet water pipe are placed on the bottowm, and inlet
valve is placed on the back .
●The stainless steel rule can display the water level clearly.
●IPX7 ipx8 immersion test chamber buit-in a stainless steel hook.
user can place the sample easily.