|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
Description
EN 50289-4-17 300~400nm cable Low temperature xenon lamp test Chamber uses a xenon arc lamp that simulates the full sunlight spectrum to reproduce destructive light waves in different environments. Test equipment can provide environmental simulation and accelerated testing for scientific research, product development and cable quality control.
Technical Parameters
Name | EN 50289-4-17 300~400nm Cable Low Temperature Xenon Lamp Test Chamber |
Model | XL-750C |
Internal dimensions D*W*H | 950*950*850 mm |
Overall dimensions D*W*H | 1300*1420*1800 mm |
Specimen Capacity | 42pcs |
Irradiation Source | 1 piece of 4500w water-cooled xenon arc lamp with inner quartz and outer borosilicate filter |
Irradiance Range | 150W/㎡ |
Bandwidth Measurement | 300~400nm |
Chamber Temperature Range | -40～ 100 ℃ ±2℃ |
Black Panel Temperature | BPT 35 ~85℃±2°C |
Relative Humidity Range | 50~98% R.H±5% RH |
Water Spray cycle | 1～9999H59M, adjustable |
Controller | programmable color display touch screen controller, PC Link, R-232 interface |
Interior material | SUS304 stainless steel |
Exterior material | Steel Plate with protective coating |
Power Supply | AC380V 50HZ |
Cable Climate Testing
Cable xenon accelerated weathering chamber meets cable test requirements
1.Standard illumination 43W/m2 at 300~400nm,
2.Automatic control temperature, humidity, circulation,
3.Adjust the light intensity 43W/m2 at 300~400nm,
Cable Low temperature xenon lamp test Chamber complies with cable test standard EN 50289-4-17
More Details
 |  |
| Touch-screen controller, user-friendly,Can realize the cable test cycle requirements, (360 cycles, 720 hours) | The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results |
LIB Equipment Test Procedure
EN 50289-4-17 300~400nm cable Low temperature xenon lamp test Chamber
1. Six samples were hung vertically, and evenly exposed to light during the test,
2. The black panel temperature should remain in the range of 60±3 ℃,
3. Humidity should remain in the range of 50±5%RH,
4. Rotation speed should turn at a speed of 1r/min,
5. The overall duration of the test shall be 720 h (360 cycles),
6. The periods of each cycle, total time of 120min, includes:
* 102 minutes of dry UV exposure at a temperature of 60±3 ℃, followed by
* 18 min of rain exposure, without radiation, at a temperature of is 50±5 ℃
