|
[China]
Trade Verify
Address: No.1 Zhangba First Street, Xian High-Tech Area, Shaanxi, P.R. China 710065
Contact name:Serena
Xi'An LIB Environmental Simulation Industry |
|
Verified Suppliers
|
|
|
LIB Industry IP65 ingress protection test device blowing Sand And Dust Test Chamber the destructive effect of natural sand,dust and wind climate on products, suitable for testing the shell sealing performance of products.
Dust ingress test chamber provide environments to test exposure of automotive and electronic components to concentrated levels of dust to validate seal integrity.
Dust blowing test chamber is applied to test the performance of electronic & electrical products, automotive, motorcycle parts, seal the pieces in the sand and dust environment using, storage, transportation, etc.
Main Technical Parameter of Sand Dust Test Chamber
| Name | IP65 Ingress Protection Test Device blowing Sand And Dust Test Chamber | |
| Model | DI-800 | |
| Internal dimensions (mm)8 | 800*1000*1000 | |
| Overall dimensions (mm) | 1040*1450*1960 | |
| Temperature range | Ambient to +50℃ | |
| Relative Humidity | <30%RH | |
| Normal wire diameter | 50um | |
| Normal width of a gap between wire | 75um | |
| The Talcum powder amount | 2kg ~ 4kg/m3 | |
| Fight time | 0 ~ 99H59M | |
| Fan cycle time | 0 ~ 99H59M | |
| Specimen power outlet | Dust-proof socket AC220V 16A | |
| Controller | programmable color display touch screen controller | |
| PC Link, R-232 interface | ||
| Vacuum system | Equipped with a pressure gauge, air filter, pressure regulator, connecting tube | |
| Circulating fan | Enclosed alloy low-noise motor, multi-vane centrifugal fan | |
| Heating system | Independent Nichrome electronic heating system | |
| Exterior material | Steel Plate with protective coating | |
| Interior material | SUS304 stainless steel | |
| Safety System | Electric leakage, short circuit, Over-temperature, motor overheating Over-current protection/ Power failure memory function for controller | |
| Power supply | 380V 50HZ | |
 |  |
Vacuum System for Specimen Dust sand test chamber is fitted with vacuum pump, a pressure gauge, air filter, pressure regulator, connecting tube which one side to connect pump, one side connect to test specimen. Adjust vacuum value on control panel.
| Dust Circulation During test, dust is blown in test area by motor and blower, and then fall in funnel, and re-cycle blowing by circulating pump to achieve dust circulation. Bottom of chamber is fitted with blower, vacuum pump, motor. Dust collection section is located on bottom of test chamber. |
 |  |
Control Panel Programmable color touch display controller 99 programs 99 sections R-232 interface PC Link with software Show total process time on controller.
| Test Area & Shelf Interior of Chamber is SUS304 stainless steel. A stainless steel shelf for placing test specimens Standard load of shelf is 50kg Normal wire diameter is 50 um. Normal width of a gap between wires is 75um. Built-in power interface for test specimen Test chamber internal illumination Vacuum system for specimen |
Interior of Chamber is SUS304 stainless steel.
The air velocity for the blowing of dust is controlled by a dust blowing mechanism that includes a motor and blower combination
Dust re-cycle blowing by circulating pump.
Dust collection section is located on bottom of test chamber.
A heater fixed into test chamber to keep dust dry.
A viewing window with a manually controlled wiper.
Programmable color display touch screen controller which located on right side of chamber
Warranty & After Sales Service
3 Years Warranty, Lifelong Follow-up Services. We have a professional after-sales team, if you have any questions during operation, we will supply solutions to you with 24 hours.
How to Service?
At first, our test chambers are produced based on 20 years product lifetime. Normally once test chambers have problems, we judge the problems, and send spare parts to our customers, and teach them how to change new parts on by email or video. Within 3 years, all spare parts and shipping cost (by DHL, TNT, and FedEx) paid by our company LIB.
If customers need our engineers on site service, the company only need pay the ticket accommodation to our engineers, service is for free.
If Products still can't use after our engineers repair, we will produce a new test chamber (same as the old one) to our customers with no charge.
You can contact our local service center in overseas market to get service and product.
Q: Are you trading company or manufacturer ?
A: We are a manufacturer.
Q: How long is your delivery time?
A: Generally it is 5-14 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? Is it free or extra ?
A: No, we don't provide the samples for testing.
Q: What is your warranty ?
A: The warranty for the equipment is 3 year. Definitely, all equipment are tested well and runs well by testing our customer's sample before shipment. Please contact us if the equipment doesn't work well after being shipped to your company. We will guide you how to fix it. The spare parts or components will be sent if necessary.
| Industrial Drying Oven | Sand And Dust Test Chamber |
| Benchtop Environmental Chamber | Water Spray Test Chamber |
| Constant Humidity Chamber | UV Weathering Test Chamber |
Contact us now,Attach 2 kg of talcum powder!
