|
[China]
Trade Verify
Address: No 803，Unit 3 ,DaDou Road, Huihao Building .Fangshan District,Beijing,China
Contact name:Lee
Beijing Ding Ding Future Technology Co.Ltd |
|
Verified Suppliers
|
|
|
Eltek Rectifier Module Flatpack2 110-120V/20A HE High Efficiency
Module(Part No. 241119.805)
Since the launch the Flatpack2 family has expanded into a wide selection of power ratings and voltages.
Reliable high efficiency rectifier for industrial applications
Parameters :
| Model | 110 / 2000 HE WOR | 110-120 / 20A HE |
| Part number | 241115.805 | 241119.805 |
| INPUT DATA | ||
| Voltage range (nominal) | 185 - 275 V AC/ DC | 176 - 277 V AC 1) |
| Voltage range | 85 - 300 V AC/ DC | 85 - 305 V A 1) C |
| Frequency | 0 - 66 Hz | 45 - 66 Hz |
| Maximum current | 11.9 A RMS | 18.64 ARMS |
| Power Factor | 0.99 (@ 50-100 % load) | 0.99 (@ 50-100 % load) |
| THD (@ 230 VAC) | < 5 % (@ full load) | < 4 % (@ full load) |
| Protection | Varistor for transient protection, fuse in both lines, shutdown above 300/ 305 V | |
| OUTPUT DATA | ||
| Default voltage | 122.5 VDC | |
| Voltage range | 89.22) - 171.6 VDC | 90.02) - 151.25 VD 1) C |
| # Pb cell supported (1.8 - 2.4 V DC/ cell) | 54 - 71 | 54 -60 |
| # NiCad cell supported (1.05 - 1.65 V DC/ cell) | 85 - 104 | 86 - 91 |
| Max power, nominal input | 2000 W | 3025 W1) |
| Max power, 85V input | 850 W | 1280 W |
| Max current | 16.7 A | 20 A |
| Hold-up time, default voltage and 1500 W load | 20 ms, VOUT > 99.7 VDC | 10 ms, VOUT > 99.7 VDC |
| Current sharing | ±5% of maximum current from 10 to 100% load | |
| Static voltage regulation | ±0.5% from 10% to 100% load and nominal input | |
| Dynamic voltage regulation | ±5.0% for 10-80% or 80-10% load variation, regulation time < 50ms | |
| Rippel and noise, 30 MHz bandwidth | < 500 mV PP | |
| Protection | Overvoltage shutdown, short circuit proof, high temperature, hot plug -in inrush current limiting, ORing diode | |
| OTHER SPECIFICATIONS | ||
| Efficiency | > 94% | > 94% |
| Isolation | 3.0 kVAC – input and output, 1.5 kV AC – input earth, 1.5 kV DC – output earth 3 kVAC CAN – input, 3kVAC CAN – output | |
| Alarms (Red LED) | Low mains shutdown, High and low temperature shutdown, Rectifier Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm, CAN bus failure | |
| Warnings (Yellow LED) | Rectifier in power derate mode, Remote battery current limit activated, Input voltage out of range, flashing at overvoltage | |
| Normal (Green LED) | Input and output ok | |
| MTBF (Telcordia SR-332 Issue I method III (a)) | >391 000h (@T AMBIENT= 25°C) | >400 000h (@T AMBIENT= 25°C) |
| Operating temperature (5 - 95% RH non-cond.) Output power de-rates above temp / to | -40 to +75°C [ -40 to +167°F] +55°C / 1350W @ +75°C | -40 to +75°C [ -40 to +167°F] +50°C / 1150 W @ +75°C |
| Storage temperature | -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing | |
| Dimensions[WxHxD] / Weight | 109 x 41.5 x 327mm (WxHxD) [4.25 x 1.69 x 13”] / 1.950 kg [4.3lbs] | |
| DESIGN STANDARDS | ||
| Electrical safety | UL 60950 -1, EN 60950 -1, CSA 22.2 | |
| EMC | ETSI EN 300 386 V.1.3.2 EN 61000-6-1 / -2 / -3 / -4 / -5 | |
| Mains Harmonics | EN 61000 -3-2 | |
| Environment | ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3) & 2-3 (Class 3.2) ETSI EN 300 132-2 2011/ 65/ EU (RoHS) & 2008/ 98/EC (WEEE) | |
Marine compliance (EMC class B with AC filter) | DnV Rules for Classification of Ships, High Speed & Light Craft and DnV Offshore Standards |
- |
1) Specification valid for HW version 2 and newer. For older revision see DS:24111x.805.DS3 ver1. 2) Output voltage will increase at light loads (< 1.6A) | ||
Solutions
We provide a complete solutions including site survey, propose
professional plan according to customer’s request ,technical
support, and maintenance service for Telecommunication Companies in
and out of China. We have a competent team and a network of trusted
Partners around the world.
FAQ :
1. How do you control the quality?
A:All products before the shipment are simulated usage scenarios,
load and full load and current sharing test to ensure the quality
of the product.
2. What is your minimum order quantity?
A:There is no minimum order quantity, and one can also be done. The
only difference is the price and schedule.
3. Can you introduce your company?
A:I am very honored. I will send you the company’s introduction
document later to give you a more comprehensive and direct
introduction to our company’s information.
4. What are the advantages of your company?
A:Adequate inventory, and supply guarantee for the subsequent
renewal of supply, flexible provided according to different to
different needs of customers, providing different solutions.
5. Can i send samples?Report it to me along with the price?
A:You can send samples, the samples are subject to large pride, and
the freight needs to be borne by you.
6. How do your company deal with the problem on quality?
A:Our company has been doing this industry for almost 10 years. It
has already had a certain reputation. We will carefully analyze it.
If it is indeed our quality problem, you can rest assured that it
will do things according to the contract agreement and will never
let you have any after the worries, our service team will be happy
to serve you.
7 What about the quality ?
A:100% original with new package. we will test each item before
posted to make sure each item with good quality.
8 How many months for guarantee ?
A: 1 year quality guarantee
9 How to deal with any inferior -quality goods ?
A: Goods can be post by with our charge of post fee for any bad
quality products within guarantee time.
