Active Member
|
[China]
Address: No.102, B Block,Hytera Science and Technology Park, No.3 Baolong 4th Road, Longgang Dist, Shenzhen, China 518116
Contact name:Helen He
tecsis (Shenzhen) Sensors Co., Ltd |
|
|
Through Hole Tension Compression Rod End Load Cell Force Transducer 100kg To 2t
Features :
Description:
F2817 Force transducer is a rod end load cell.
There is a thread on one side and there are 4 holes on the other side. The structure makes it easy to install and to use.
It is made of 17-4PH stainless steel, the protection class is IP67, based on these features, it can be used in many humid enviroment.
The diameter is 51mm and the size of the thread is M12. it is suitable for force measurement in limited sapce.
It comes with complete 3m cable.
Widely used for easy installed micro miniature tension and pressure test equipment, crane scale, level indicator and other force measurement application.
Applications:
Widely used for easy installed micro miniature tension and pressure test equipment, crane scale, level indicator and other force measurement application.
Technical parameters:
Specifications | Technique |
Rated output | 1.5±10%mV/V |
Zero balance | ±2% F.S. |
Non-linearity | ≤0.5% F.S. |
Hysteresis | ≤0.5% F.S. |
Repeatability | 0.1% F.S. |
Creep (30min) | 0.2% F.S. |
Temp. effect on output | 0.05% F.S. / 10ºC |
Temp. effect on zero | 0.05% F.S. / 10ºC |
Input impedance | 385±10Ω |
Output impedance | 350±5Ω |
Insulation | ≥5000MΩ / 50VDC |
Recommended excitation | 10V |
Maximum excitation | 15V |
Compensated temp. range | - 10~60ºC |
Operation temp. range | - 20~80ºC |
Safe overload | 150% F.S. |
Ultimate overload | 200% F.S. |
Cable size | Ø5*3000 mm |
Protection class | IP67 |
Cable color code | Input: Red(+) Black(-); Output: Green(+) White(-); |
Size and capacity:
Load direction:
Schematic Wiring Diagram :
