|
[China]
Trade Verify
Address: No.166, Zhengyang Middle Road, Chengyang District, Qingdao City, Shandong Province, China. 266000
Contact name:Louis.liu
Qingdao Exceed Fine Chemicals Co.,Ltd |
|
Verified Suppliers
|
|
|
Hardness 85 Shore A Thermoplastic Polyurethane Polyether Based TPU M385
Thermoplastic Polyurethane
| Item | Value |
| Yellow index(Yi) | 1.3 |
| Specific gravity(g/cm3) | 1.13 |
| Hardness(Shore A) | 86±1 |
| Tensile strength(Mpa) | 30 |
| 100% Modulus(Mpa) | 5.5 |
| 300% Modulus(Mpa) | 11.5 |
| Elongation at break(%) | 610 |
| Tear strength (KN/m) | 95 |
| Abrasion (mm³) | 37 |
| Flowing beginning Point (℃) | 161 |
| VICAT Softening point (℃) | 130 |
| Compression set (70h/25℃,%) | 25 |
For optimum results, previous drying of the product 2-3 hours under 100~110℃ is advisable, in a hot air circulatory, vacuum desiccate-air dryer.
25kg/bag.
Never put opened packages exposed in open air for prolonged periods of time during molding and processing. Because of the high moisture absorbing property, TPU products should be well stored in a dry, cool and shady area.
These are typical values and should not be used as specifications.
