Tough Long Lasting Tricone Roller Bit Antiwear For Soft - Very Hard Formations

Tough And Long Lasting Tricone Roller Bit For Soft To Very Hard Formations

What is Tricone Roller Bits?

Tricone Roller Bit is a drilling method that uses a roller bits. In roller-bit drilling, rock is cut by hard-alloy teeth projecting from rolling cutters, which rotate on the drill-bit bearings. Inturn, the drill bit rotates at a high rate, and presses against the bottom hole with a high axial force. The teeth of the rolling cutters roll over the bottom hole and, owing to the large stresses that develop in the area of contact between the teeth and the rock, cut the rock by crushing and chipping. As the hardness of therock increases, the rotation rate decreases and the axial force increases. Destroyed at the mine the rock is removed to the surface by air compressor, mud pump, or a combination of these methods.

Application

Tricone drill bit is one of the main tools for blast hole and well drilling, mainly used for large-scale open-pit mining, such as open-pit coal mines, iron mines, copper mines and molybdenum mines, also the non-metallic mines. With the increasing in variety of type, it’s also widely used in quarrying, foundation clearing, hydrogeological drilling, coring, tunneling in railway transportation department and shaft drilling in underground mines. The rock breakage by the tricone bit which used in mine is working with both the impact of teeth and the shear caused by slippage of the teeth, which bring high rock breaking efficiency and the low operation cost.

Click here to know how to select bits ABOUT IADC.pdf

Bits thread are manufactured according to API standards.

Advantage:

1. Strictly select the material to ensure the reliable quality. Bad steel and tungsten carbide inserts won't be used.

2. Strictly act according to the ISO9001 standard, and control by full-scale inspection.

3. Sales and support people are highly trained in the latest rock drilling technology and can offer you expert advice on what products will best fit a specific end use application.

Quality Control

1, Raw material selection:To make a good drill bit, it is necessary to select the best material and gatekeeping the quality of the material. We purchase the high-quality steel and strictly control the material composition and size, it main includes the detection of the shape, diameter, reamed diameter, length composition, and flaw of the raw material, Tungsten Carbide and Grease are also the best raw materials on the market.Besides, we marked every different piece of materials before transferred to the warehouse.

2, In strict accordance with the ISO9001 international standards for production.

Carefully control every step of the production, complete each of the production process,

the production process is including blanking, forging, rough turning, heat treatment,fine turning, quenching, assembling, welding, painting, then storage.

Each working process was full inspected, after the qualification, then move to next working process, which to ensure the 100% qualified rate.

The above represents commonly available sizes and types, we do produce other sizes and types of rock drill bits which do not appear on . Please contact us for more information.