|
[China]
Trade Verify
Address: Junzi Guan Village, Xicun Township, Hejian City, Hebei Province, China
Contact name:Yu
Cang Zhou Creator Drill Equipment Scinence And Technology Co.,LTD |
|
Verified Suppliers
|
|
|
20" HDD Hole Opener For Trenchless/Horizontal Directional Drilling Tools
The HIGH STRENGTH, HIGH TOUGHNESS CEMENTED CARBIDE BLOCK, combined with the OPTIMIZED number OF block and row, exposure height and SPECIAL-shaped BLOCK, GIVE FULL play to THE high wear resistance and excellent cutting ability of the blade. For the steel bit, the tooth surface is hard-faced with a new wear-resistant material, thus extending the service life of the cutting structure while still maintaining a high ROP.
IADC | Rock formation | WOB (KN/mm) | PRM(r/min) |
415/425/435 | Low compressive strength, high drill-ability and extremely soft
formation, like shale, clay, sandstone, conglomerate etc | 0.35~0.90 | 140~70 |
447 | Low compressive strength, high drill-ability and soft formation, like shale, clay, sandstone, soft limestone, salt rock, plaster etc. | 0.35~1.00 | 140~60 |
517 | Low compressive strength, high drill-ability and soft formation,
like shale, clay, sandstone, soft limestone, salt rock, etc | 0.35~1.05 | 120~50 |
527 | Soft formation with low compressive, like Low compressive strength,
high drill-ability and soft formation, like shale, clay, sandstone,
soft limestone, salt rock, anhydrite etc. | 0.35~1.05 | 120~50 |
537/547 | Low compressive strength, medium hard formation with hard abrasive interlayer, like Hard shale, anhydrite, soft limestone, sandstone, dolomite with mezzanine, etc. | 0.50~1.05 | 110~40 |
617/627 | High compressive strength, medium hard and thick hard interlayer, like hard shale, limestone, sandstone, dolomite, etc. | 0.50~1.05 | 80~40 |
637/647 | High compressive strength, medium hard and high abrasive formation, like limestone, dolomite, sandstone, chert, etc. | 0.7~1.20 | 70~40 |
1. Journal bearing. Hard face head bearing surface. The taper bearing is inlaid with antifriction alloy and then silver plated. The bearing capacity and bite resistance of bearings are greatly improved.
2, the O-ring is made of high-saturation nitrile rubber with higher wear resistance, which increases the sealing section. The sealing flange in the conical sealing area is precisely designed, which increases the reliability of sealing.
3. Bit bearing can be ball lock or ring lock. Bits with ring lock bearings can support higher bit weights and bits with ball lock bearings can be used for high-speed drilling.
4. The full rubber compensator can limit the pressure difference and prevent drilling fluid from entering the lubricating oil system, which provides a good lubrication guarantee for the bearing system.
The company is located in Junziguan Village, Shijing Township, the ancient town of civilization, 156+8 kilometers away from the 106 National Road, with convenient and smooth transportation. Over the years, our company has focused on the design and manufacture of rock reaming bits. Quality and management meet and implement ISO 9001:2015 standards.
We always follow the "quality of survival, reputation and development" survival principle and "your demand is our demand" service purpose. Through continuous technological innovation, we strive to build our global brand.
With high quality products, perfect service and good reputation, we are willing to cooperate with our customers to create a better future! Welcome friends to visit the factory!
1. Who are we?
We are headquartered in Hebei, China, and have been selling worldwide since 2019.
2. How can we guarantee the quality?
Pre-production samples are always used before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Roller cone bit, Pdc bit, drilling machine parts, oil drilling equipment
4. Why buy from us instead of other suppliers?
The company was founded in 2013, specializing in the production of tri-cone drill bits, PDC bits, hole openers, scraper bits and related drilling equipment. The company is located in Hebei, China.
