Home Companies Shanghai BGO Industries Ltd.

Swimming Solar Pool Bubble Cover And Blanket Bubble Film Wrap PE Plastic Swimming Pool Cover Reel

Shanghai BGO Industries Ltd.

Contact Us

[China] country

Trade Verify

Address: HuaAn Road No.171, Huaqiao Town, Kunshan City, Jiangsu Province,China

Contact name:Virginia

Inquir Now

Shanghai BGO Industries Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Swimming Solar Pool Bubble Cover And Blanket Bubble Film Wrap PE Plastic Swimming Pool Cover Reel

Country/Region china
City & Province jiangsu
Categories Ice Tongs
InquireNow

Product Details

 

 

Swimming Solar Pool Bubble Cover And Blanket Bubble Film Wrap PE Plastic

 

Introduction

 

A pool solar cover is essential to the running of your swimming pool. Not only will it generate free heat from the sun but it will also slow down heat loss and help to reduce evaporation. As the sun's rays pass through the cover, heat generated is trapped by the bubbles on the underside of the cover which in some cases can result in as much as 5- 8°C+ temperature rise, a sunny day will of course help to achieve this. Most of us however are running the pool with a heater, whether it be a heat pump, electric, gas or oil boiler the aim is the same - keep the heat in the water. You would only be wasting your money if you haven't yet got a Solar cover or heat retention cover on your swimming pool. A solar cover allows a build up of free heat from the sun during the day and it will also act like a blanket to keep heat loss at a minimum overnight.

 

1. The bubble plastic swimming pool cover allows more heat transmit in, stops heat from escaping and saves the water amount.
2. Pool owners are amazed at the water savings when using our swimming pool cover , which can save around 10000 liters all the summer, so water conservation is more important than ever.
3.The pool cover can prevents evaporation, the amount of water loss depends on the surface area of your pool, the temperature of the water and air, humidity and the wind blowing.
4. The Pool Cover is a physical barrier between the pool water and atmospheric temperature, which acts as an insulator, prevents the heat convective, retains the day warm within the pool and keeps the cold weather out the pool 

 

Application and benefits:

 

(1) Widely use in the above ground outdoor and indoor pools, public pools

(2) Heat the swimming pool water during the day, reduce cleaning time by keeping dirt and other debris out of the pool

(3) Act as an insulator minimizing heat loss and retaining the heat at night

(4) Cuts heating costs ,cuts water evaporation , reduce the pool chemical consumption

(5)Conserve water by reducing the amount of make-up water needed


Product Description:

 

Main technical parameters

1. Thickness of thermal insulation cover: 4mm+0.1

2. Density: > 0.028g/3

3. Tensile Strength: > 150 Kpa

4. Tear strength: > 260N/m

5. Water absorption: > 0.04 kg

Shape: Square, Round, Elliptical, Hexagonal (Supporting Custom Specifications)

 

ItemBubble Film Wrap PE Plastic Swimming Solar Bubble Pool Cover And Blanket 
SizeCustomized as client's request 
Material:PE bubble
Temperature resistance-50°C-+80°C
Colorblue,black,silver,golden
Bubble Size12mm
ShapeRectangle, round and oval, hexagon
Payment:We accept Paypal, Money Gram, Western Union, T/T
Shipment:Within 5-7 working days after payment

 

Specification:


1. Thickness: 300/350/400/450/500micron.
2.Dimension:9mx5m,10mx4m,10mx6m,11mx5m,12mx5m,14mx5m,etc.
3. Colour: blue, or available upon request.
4. UV (ultraviolet )included.
5. Roll material spec.: W: 1.53-1.54m, length: upon request.
6. Bubble diameter: 10mm, 20mm.

 

How to Installation?

 

To install your bubble plastic swimming pool cover simply place the rectangle over your pool and trim to shape with scissors. Follow the outline of your pool and leave approx 75mm up the edge. Extra material will be included on all blankets.

 

Our company swimming pool insulation film fixed width of 3 meters, that is to say, custom-made width of less than 3 meters does not need welding, width of less than 5.9 meters there is only one welding seam.

 

1. Swimming pool insulation cover saves you money.

Whether indoor or outdoor swimming pools, if the swimming pool cover is installed, the operating cost of the pool can be reduced. It can not only save as much as 70% of the heating fee, but also maintain a warmer temperature of 8-10 degrees. It can not only reduce more than 90% of water evaporation, but also reduce 70% of chemical consumption. It is possible to save 50% to 70% of the cost.

· The pool cover of indoor swimming pool can not only reduce water evaporation, but also need indoor air ventilation. If the exhaust fan is not turned off when used, this will save more energy.

 

2. Swimming pool insulation cover saves you money, reduces the use of chemicals and expensive dehumidification system

· By reducing evaporation (more than 90%), the use of chemicals can be reduced by 70%.

· For example, in swimming pools with Pool caps, chlorine can last for several weeks, but in an open-air swimming pool on a hot day, a gallon of chlorine will evaporate in two hours (industry data).

· In indoor swimming pools, the pool cover not only prevents water evaporation, but also, in most cases, eliminates expensive dehumidification systems.

 

3. Swimming pool insulation cover saves you money and keeps the pool clean

· When not swimming, as long as the pool cover is covered, dust and debris can be prevented from falling into the pool, and the cost of cleaning and maintenance of the pool can be reduced.

· This means that you can spend more time enjoying the pleasure of swimming and less time maintaining the pool.

 

4. Swimming pool insulation cover saves you money and prolongs the service life of swimming pool facilities

With the heat preservation and the reduction of the number of pool cleaning and maintenance, the pool can be used longer, thus bringing you more benefits and happiness.

 

BGO Trade info

 

Trade Terms: FOB , CIF, EXW
Payment terms: T/T, Western Union, Paypal, Escrow, MoneyGram, L/C, ect.
Payment Condition: Usually 30% deposit in advance, 70% balance before delivery OR discuss.
Delivery Time: usually 7-10 working days after deposit, or depends on the specific orders.
Packing: Packed by PE bag or we can pack this product based on customer requirement.
Shipping: by sea, by air and by express delivery

 

FAQ
 
1. How about your delivery time?
A: Generally, it will take 10 to 12 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
 
2. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
 
3. What is your sample policy?
A: We can supply the sample if we have ready parts in stock.
 
4. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
 
5. How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,no matter where they come from.
 
More pictures  as below 
 
 
 
 
 

Hot Products

5000L Metal Frame PVC Tarpaulin Fish Tank Flexible PVC Storage Fish Tank Name 5000L Metal Frame PVC ...
4000L Aquaculture Fish Farming Pool Flexible Round Farm Tank Color: Blue Volume: 4000 liter Features...
5000L Aquaculture Fish Farm Wire Mesh Fish Farming Tank Water Tank Color: Blue Volume: 5000 liter ...
1000L~50000L Durable Foldable Portable PVC Tarpaulin Canvas Water Fish Farming Tank Color: Blue ...
Fish Tank Farming Round And Square Foldable PVC Tarpaulin Tank Fish Pond Color: Blue Volume: ...
10000L Wholesale Round Folded PVC Tarpaulin Fish Tank Fish Pond Details Material: 0.9mm pvc with UV ...