Field Assembly Fast Fiber Optic Connector FC Embedded Quick For FTTH FTTX

Field Assembly Fast Fiber Optic Connector FC Embedded Quick For FTTH FTTX

 
 
Fiber Optic FC Field installation connector also be called Fast install connector is a new kind of connector that could be used in FTTH project scene. They don’t need to polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Of course, It don’t need fused the fiber. Just some little tools enough, so it could save time and cost.
 
Assembly of the FC type quick connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. No electrical power supply is needed. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.

Fiber Optic FC Fast Connector Field Assembly Connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV and FTTH, is already proving itself to be the connector of choice by incumbents, municipalities, utilities & alternative carriers. Our Field Assembly Optical Connector series are now available in SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm, 3.0mm diameter single mode and multimode fiber types, including Multi-mode 62.5/125um and Multi-mode 50/125um. The single-mode versions are available with SPC or APC ferrules.
 
FC Fiber Optic Fast Connector Parameters:
 

 
FC Fiber Optic Fast Connector Features:

• No epoxy and polishing required
• Quick and easy fiber termination
• Precision mechanical alignment insures low insertion loss
• Superior optical performance
• Streamlined component design, convenient operation
• Pre-installed, on-site assembly without end face grinding and consideration
• Uses proven, molded v-groove technologies
• Allow optical continuity to be verified by use of visual fault locator (VFL)

 
FC Fiber Optic Fast Connector Applications:
 

• Fiber optic communication system and telecommuni- cation networks
• Fiber optic data transmission
• CATV
• Optical access network
• Fiber to the Subscriber (FTTX) applications
• Optical cable interconnection
• Maintenance or emergency restoration of fiber net- works

FC Fiber Optic Fast Connector Packing Pictures:

 
Why choose TAKFLY--Advantages as follows:
Professional manufacturer:

• With more than 21 years manufacturing experience in Fiber optic products;
• More than 450 assembly workers with 3 years experienced;
• More than 36 R&D Engineers;
• 16 Sets Germany imported Injection Machine and 16 Production Lines;
• More than 30 sets of Testing Machines: OTDR,3D,VFL,IL&RL test instrument; tension strenth tester, Crush Resistance tester, Power meter tester, light checker, ect.
• OEM Brand is acceptable.
• Exhibition: OFC, ECOC, CommunicAsia, NETCOM, AFRICACOM, SVIAZ ICT, CommunicIndonesia ,Global Soure Electronic Exhibition,etc.

Quality Control:

• Spot check the raw material incoming inspection before production;
• Fully check after every individual process finished;
• Fully check production half done;
• Fully check the finished products before packing;
• Spot check before shipping;

Delivery:

• Samples: 1-3 working days.
• Mass Production Order: 3-7 working days.
• Packaging: Plastic Bag, Carton and Pallet are available according to your request.

Price: If your QTY is big, the price could be negotiated.
 
I have been working in this field more than 6 years, I believe, I could give you very good service and professional answers!
 
If you’re interested in our products or have any doubt, why not send me inquiry at once?