|
Trade Verify
Address: 3F./4F., Zhenyingtai Technology Park, Hebei Industry Zone, Longhua New District, Shenzhen 518109, China
Contact name:Amy Cheah
EASTLONGE ELECTRONICS(HK) CO.,LTD |
|
Verified Suppliers
|
|
|
900MHZ / 1800MHZ DCS Cell Phone Signal Repeater , Indoor Mobile Phone Signal Repeater
Introduction
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications can not work well due to leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. A mobile phone repeater is ideal for house, home, office use.
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
Introduction To Mobile Phone Signal Repeater |
1. Enhance Mobile Phone |
2. Improve |
3. Reduce |
4. Protract |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
2. Features |
High gain, easy installation and operation. |
Full-duplex, single-port design, build-in power supply. |
Use ALC technology, adjust extent automatically |
LED Light Working & Signal Condition Indicators |
Big linear power, control intermodulation & scatteration stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
CE and RoHs Approved |
Specification
Frequency range | Uplink:1710~1785MHz Downlink 1805~1880MHz |
Gain ( dB) | Uplink Gp≥60 Downlink Gp≥65 |
Export power (Po) | ≥27dBm |
Pass band ripple | ≤3dB |
I/O impedance | 50Ω/N connector |
Noise figure | ≤4dB |
Transmission Delay | ≤0.5μs |
Ambient temperature | -10℃～60℃ |
Power supply | AC110～240V 45～55Hz |
Size | 220 x180 x 20 mm |
Reliability | To the GB6993-86 standard |
Electromagnetic compatibility | To the ETS300 694-4 standard |
Function | a) Power supply LED denote b) Export power LED denote |
coverage area | 1000 m2 |
Installation Approaches
Fix up outdoor antenna reception on housetop and point to signal tower.
Connect outdoor antenna to “outdoor” port in repeater machine through cable.
Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
Plug power adaptor into AC power socket and finish installation.
Technique Supporting
If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
If can not call out, please adjust the direction of outdoor antenna.
If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antenna have distance of 20
Picture of company
Picture of factory
Picture of fairs
Picture of certification
