|
Trade Verify
Address: 3F./4F., Zhenyingtai Technology Park, Hebei Industry Zone, Longhua New District, Shenzhen 518109, China
Contact name:Amy Cheah
EASTLONGE ELECTRONICS(HK) CO.,LTD |
|
Verified Suppliers
|
|
|
High Gain EST-MINI 2100MHZ Cell Phone 3G Signal Repeater for Indoor
Quick details : 3G 2100 Mhz Networks
UK Networks Voice Three
Description
This system will boost any phone that’s on 3G data and Voice on THREE in UK or any worldwide carrier using the 2100MHz frequency. It is compatible with all mobile handsets. Area coverage is effective up to a maximum of 50m2.
The signal booster captures and boosts a weak mobile signal through a high gain antenna and amplifier and boosts coverage for your home, office or building up to 50m2 over the 2100 MHz frequency. The kit comes complete with everything you need to increase signal strength and stop dropped calls, it is simple to install, comes with technical support and is despatched promptly.
Introduction To Mobile Phone Signal Repeater |
1. Enhance Mobile Phone |
2. Improve |
3. Reduce |
4. Protract |
5. Economic Building Cost |
6. Easy Operation |
7. Easy Installation |
8. Build-in Power Supply |
The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor ctromagnetism environments, protract cellular battery life and reduce radiation of cellphones.
2. Features |
High gain, easy installation and operation. |
Full-duplex, single-port design, build-in power supply. |
Use ALC technology, adjust extent automatically |
LED Light Working & Signal Condition Indicators |
Big linear power, control intermodulation & scatteration stably |
Dependability stand by GB6993-86 standard |
Compatibility of electromagnetism according with ETS300 609-4 |
CE and RoHs Approved |
Technique
Frequency range | Uplink:1930~1990MHz Downlink 2110~2180MHz |
Gain ( dB) | Uplink Gp≥45 Downlink Gp≥50 |
Export power (Po) | ≥23dBm |
Pass band ripple | ≤3dB |
I/O impedance | 50Ω/N connector |
Noise figure | ≤4dB |
Transmission Delay | ≤0.5μs |
Ambient temperature | -10℃～60℃ |
Power supply | AC110～240V 45～55Hz |
Size | 160 x 60 x 20 mm |
Reliability | To the GB6993-86 standard |
Electromagnetic compatibility | To the ETS300 694-4 standard
|
Function | a) Power supply LED denote b) Export power LED denote |
coverage area | 50 m2 |
Picture of product
