|
Trade Verify
Address: 3F./4F., Zhenyingtai Technology Park, Hebei Industry Zone, Longhua New District, Shenzhen 518109, China
Contact name:Amy Cheah
EASTLONGE ELECTRONICS(HK) CO.,LTD |
|
Verified Suppliers
|
|
|
GSM900MHZ Portable Mini Cell Phone Signal Repeater With Power Supply Repeater
Quick Details:
1 amplifiy GSM signal ,uplink :890-915MHZ downlink :935-960MHZ
2 Power supply: DC+5V
3 built-in indoor antenna
4 portable and easy installation
5 Imrove calls clarity
1. Introduction
Portable mini Pico mobile phone signal repeater is a new product which is to solve the inconvenience of mobile phone repeater installation. Therefore, there is an immediate solution to amplify mobile phone signal in a small coverage, it is good choice to have one this portable repeater, without installation and carry-on. This is the necessary device in signal blind area of business trip, traveling, home and office etc.
2. Advantage
1. Exquisite appearance:
Adopting disposable molding and injection appearance, beautiful as crafts, small size and easy-taking.
2. Powerful function:
amplifying all kinds of mobile phone signal within 1-30m²and the best assistant for calling.
3. Automatically amplifying mobile phone signal and no testing instrument
1. Automatically adjusting the uplink and downlink gain
The device will automatically check input power and control output power when connection with power supply, it will automatically calculate the gain of downlink to adjust the uplink gain after 5 minutes, keeping the performance of the device system and amplifying balance to achieve adjusting uplink and downlink gain function.
2. Isolation checking function
The device will checking the antenna isolation after connecting with power supply, if the antenna isolation does not meet the device installation requirement, the indication light will indicate timely and automatically control the device to reduce gain until the device does not cause self-excitation, it will protect the safety of repeater and no interference of mobile phone network.
3. Power indication function
The device will automatically check the output power after connecting with power supply and timely indicate to achieve good communication and largest coverage.
4. Automatically installation indication
The device will timely and accurately display isolation, power etc information to guide the user without any testing instrument to smoothly operate and amplify coverage.
Technology index
specification | Function condition | ||||
Uplink | Downlink | ||||
Model | Gmini | brown | 890-915 | 935-960 | |
Pass band ripple | ＜4.0dB | ||||
Max gain | 45±3dB | ||||
Gain Adjust Range | 43dB~47dB | ||||
Max Export power | Uplink | 5±2dBm | |||
Downlink | 5±2dBm | ||||
AGC | Automatic gain adjustment range 20dB | ||||
Noise figure(reverse) | <7dB(Max Gain) | ||||
Inter-Modulation Attenuation | 9KHz~1GHz ≤-36dBm @ 3KHz | ||||
1GHz~12.75GHz ≤-36dBm@ 3KHz | |||||
Out-of-band spurious emission
| 9KHz~1GHz ≤-36dBm @ 3KHz | ||||
1GHz~12.75GHz ≤-36dBm@ 3KHz | |||||
Transmission delay
| <5us | ||||
VSWR | <1:2 | ||||
Ambient temperature | -10~+50℃ | ||||
Indicator | ISO red(Isolation testing) | ||||
UP green(uplink power) | |||||
DN green(downlink power) | |||||
Power supply | DC+5V | ||||
I/O Impedance | 50Ω | ||||
input/output connector | Base station:SMA | ||||
Built-in | |||||
4. Application
5 Pictures
