Shenzhen KOMAI Automation Technology Co.,LTD |
|
SUS304 Swing Barrier Turnstile Access Control Security Systems
Product Details:
Common speed gate barrier turnstile are divided into two types,
scissor doors (wing gates) and swing doors according to the
different movement modes of the door wings.
(1) Scissor doors are often used in rail transit, and common
scissors doors are mostly used in subways and other places. The
door wings protrude from the inside of the box, which can
effectively close the passage and play a role in controlling
access. In addition, the door is equipped with an infrared sensing
device, which can realize the purpose of "one person, one card:
single pass.
(2) Swing doors appear later than scissor doors and belong to the
second generation of speed-pass doors. This category The
characteristic of the speed-pass door is that the direction of the
door wing is forward and backward. The operation process is within
the sight of the human body, which is safer. In addition, because
the door wing does not need to be retracted into the box, the style
of the swing door is more changeable. Due to the above
characteristics , Swing doors are generally used in banks,
corporate buildings, high-end office buildings, etc.
Specification:
Technology Parameters | |
Size | 1400×130×1000mm |
Unlock time | 0.2s |
Pass rate | 35p/m |
Pass width | ≤550mm |
Input | 100V~240V |
Driving voltage | 24V |
Environment | -25~+70℃ |
Power consumption | 35W |
Input | Dry contact |
Functions:
1. Anti-tailing function: There are infrared light band detection
areas in the channel, and the switch state can be adjusted by
software according to the customer's accuracy requirements. The
application of light bands can adapt to different needs to avoid
the shortcomings of point-type infrared detectors that are easy to
be contaminated and affect the reliability of judgment. It can
effectively determine the trailing party of the unread card. When
the system determines that a trailing occurs, the system will react
according to the position of the valid cardholder returned by the
infrared detector. After the door open signal is issued, there are
still some abnormal uses that will trigger an alarm.
2. Abnormal usage conditions:
(1) When the door is closed, the pedestrian enters in the reverse
direction. After the authorized door opening signal is issued, the
pedestrian enters the door, and before passing the first safety
photoelectric detection belt, if the reverse detection belt detects
that someone has entered, If the person does not leave, the buzzer
will always sound the alarm, the door will remain closed, and the
"aging" function will not calculate the time interval at this time.
(2) Reverse intrusion when the door is opened. After the door wing
is opened, if an unauthorized pedestrian enters the door detection
area in the reverse direction, the door will be closed immediately,
as long as the first protective detection belt detects the presence
of someone, "Time Limitation" The function does not calculate the
time at this time, and the door resumes normal operation when the
person leaves the second detection zone.
(3) When the pedestrian leaves, the pedestrian enters the second
safety detection zone in the reverse direction. Before the door
returns to the basic state, the second safety detection zone
detects someone entering again without a legal door opening signal,
and the alarm system issues an alarm. But as long as the protection
detection area still detects people, the door will not close.
(4) Following closely from the first detector detecting the
pedestrian to the last detector when he leaves the first safety
detection belt, the time gap is about 0.25 seconds. After the
pedestrian leaves the first safety detection belt, the reader
signals Without opening the door, a pedestrian (trailing person) is
detected in the first detection zone, the alarm sounds long, and
the door remains open.
(5) After the normal trailing pedestrian leaves the protection
detection zone, an unauthorized person is detected in the first
safety detection zone, the door is immediately closed, and the
alarm sounds long.
3. Drive: DC servo drive system and DC brushless drive system
4. The response of the door body in an emergency: When the door is
in operation, there is a sudden power failure, the door wing will
stop at the original position and can be pushed freely, or an
external 12V battery can be connected (when the power is cut off,
the battery will be briefly energized to open the swing door)
According to requirements, each device can be equipped with an
emergency button, and the selected emergency response mode can be
activated by pressing the button. Under normal circumstances, the
channel is opened in danger or panic. In emergencies, such as
police and police, the channel can be closed manually through the
remote control button. After power-on or in an emergency, the door
wing will automatically reset after self-checking without
obstacles.
FAQ:
1)What is Turnstile?
Turnstiles are a form of gate which allows only one person to pass
at a time. This enables security to efficiently prevent potential
trouble or to restrict any prohibited materials to enter into any
secured premises.It can restrict passage only to people who insert
/scan a ticket, an ID cards, access card , thus a turnstile can be
used in the case of paid access for example public transport, or to
restrict access to authorized people in corporate houses or
entrances of any building.
2)Why choose KOMAI as your supplier?
We are a leading manufacturer of turnstile and speed gate in China.
We focus on pedestrian turnstile gates.
We keep stock for regular products and we can support small orders.
Usually, our lead time is just 3 days.
Design products according to customers’ requirements.
Credibility: We are SGS certificated Supplier. Our customers are
located over 50 countries
Gratitude: We cherish the business chance you give us and return
you with quality products and good service.
Professional: We have been in this business for more than 8 years.
We have a strong professional team with various experiences.
We keep doing new product development. Our goal is to enhance our
competitive capacity constantly.
Price:Competitive price and good quality products
Quality: we do 100% inspection before the shipment.
Promise: we are always ready to take the responsibility if any loss
caused to our customer due to our mistakes.
3)What is the Lead time?
1-3days for sample in stock;7-15days for special sample
order.7-30days for bulk order.
4)What is the Payment term?
30% deposit and the outstanding payment should be cleared before
shipment.(Notify us if you have special requirements)
5) How is your Packaging?
International standard seaworthy plywood case
6)Do you provide OEM service?
Yes.we accept both OEM and ODM.