|
[China]
Trade Verify
Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600
Contact name:Macy Jin
Britec Electric Co., Ltd. |
|
Verified Suppliers
|
|
|
4P Surge Protector 40KA Surge Arrester SPD 4 Pole 275V Surge Protective Device
4P Surge Protector 40KA Surge Arrester SPD Product Details:
| BR150 40 4P | BR275 40 4P | BR320 40 4P | BR385 40 4P | BR440 40 4P | |
| SPD classification according to EN61643-11 | Type 2 | Type 2 | Type 2 | Type 2 | Type 2 |
| SPD classification according to IEC61643-11 | Class II | Class II | Class II | Class II | Class II |
| Max. continuous operating a.c. voltage Uc | 150V | 275V | 320V | 385V | 440V |
| Nominal discharge current (8/20us) In | 20kA | 20kA | 20kA | 20kA | 20kA |
| Max. discharge current(8/20μs) Imax | 40kA | 40kA | 40kA | 40kA | 40kA |
| Voltage protection level Up | ≤0.8kV | ≤1.3kV | ≤1.5kV | ≤1.8kV | ≤2.0kV |
| Voltage protection level 5kA Up | ≤0.6kV | ≤1kV | ≤1.2kV | ≤1.4kV | ≤1.6kV |
| Max. backup fuse | 125A gG | 125A gG | 125A gG | 125A gG | 125A gG |
| Response time tA | ≤25ns | ≤25ns | ≤25ns | ≤25ns | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state / fault indication | green / red | green / red | green / red | green / red | green / red |
| Cross-section area (Min.) | 4mm2 | 4mm2 | 4mm2 | 4mm2 | 4mm2 |
| Cross-section area (Max.) | 35mm2 | 35mm2 | 35mm2 | 35mm2 | 35mm2 |
| For mounting on | 35mm Din rail | ||||
| Enclosure material | Thermal plastic UL94-V0 | ||||
| Degree of protection | IP20 | IP20 | IP20 | IP20 | IP20 |
| Order Code | B1401 | B1403 | B1405 | B1407 | B1409 |
| Order Code (With remote signaling) | B1402 | B1404 | B1406 | B1408 | B1410 |
4P Surge Protector 40KA Surge Arrester SPD Advantage:
• High discharge current.
• Voltage protection level (Up) is low
• Interchangeable modules varistors
• IP20 protection
• Incorporate technology-based high energy varistors
4P Surge Protector 40KA Surge Arrester SPD Installation:
• The type 2 arresters must install into sub-distribution boards
after main distribution boards containing type 1 arresters.
• For proper operation between type 1 and type 2 arresters at least
10- 15 m cable or wire must be otherwise a decoupling coil have to
install between the two devices.
• In areas where storms are frequent, it is strongly recommended to
install additional protection systems.
Our Services:
• 17 years global leading profession manufacture of electrical
products surge arrester
• All products will be well packed before shipping
• Standard packaging, and you can also tell us your own
requirements on packaging
• Faster delivery
• Individually Tested Prior to Shipment
Certificate:
Company profile:
Wenzhou Britec Electric Co., Ltd is a manufacturer and trading company located in Yueqing city, Zhejiang province, we have more than 17 years experiences in SPD producing. Our factory is equipped with advanced machinery, also we created much experience in new product development, so can customize products per your requirements. We know that cooperation, support and service is most important and hence employed experienced and customer friendly sales, this ensures a good understanding of your requirements, on time delivery and ultimately a satisfied customer base. We are not just thriving, but growing day by day, we always provide our customers with highly quality products in affordable cost; we sincerely hope to have you as our esteemed customer and friend.
Production flow:
Laboratory equipment:
Shipping:
FAQ:
Q1: How can I trust you and your company?
A: Products pass CE, CB, TUV certificates.
Q2: How long is your products warranty?
A: The warranty period of our products is 2 Years.
Q3: How about inspection?
A: We have the whole inspection system from raw material to end
products.
Q4: What is the service offered by company?
A: We have the professional enginer team which can design and
develop the mold to arrive different customer requirement. We also
have the sales team to offer good service from pre-sale to
after-sale.
