Home Companies Britec Electric Co., Ltd.

EN 61643-11 Standard 8/20 Type 2 Surge Protection Device 35mm Dinrail

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

EN 61643-11 Standard 8/20 Type 2 Surge Protection Device 35mm Dinrail

Country/Region	china
City & Province	zhejiang
Categories	Other Security & Protection Products

Product Details

40ka Surge Protective Device 8/20 SPD Lightning Arrester Power Lightning Protection

40ka Surge Protective Device 8/20 SPD Lightning Arrester Description:

- Surge protective devices consisting of a base part and MOV plug-in protection modules.

- It protects the indirect lightning and direct lightning impact or other transient overvoltage surge, which is mainly applicable to the residence, the third industry and the industrial and mining enterprises.

- High energy MOV inside.

- Safety insulation of fire retardant high flame retardant material

- Low residual voltage and quick response.

- Built-in overheating and temperature control circuit breaker

- Reliable control

- With 35mm standard DIN-rail mounting

- With remote signaling contact for control device.

- Connecting copper stranded conductor is 4~35mm²

- Fault indication via red mark in the inspection window.

- We also can supply more of product for low--voltage power system lightning protective device, surge protective device with Imax=60kA, 80kA, 100kA etc. And type B SPD with spark gap.

40ka Surge Protective Device 8/20 SPD Lightning Arrester Product Details:

	TY150 40 4P	TY275 40 4P	TY320 40 4P	TY385 40 4P	TY440 40 4P
SPD classification according to EN61643-11	Type 2	Type 2	Type 2	Type 2	Type 2
SPD classification according to IEC61643-11	Class II	Class II	Class II	Class II	Class II
Max. continuous operating a.c. voltage Uc	150V	275V	320V	385V	440V
Nominal discharge current (8/20us) In	20kA	20kA	20kA	20kA	20kA
Max. discharge current(8/20μs) Imax	40kA	40kA	40kA	40kA	40kA
Voltage protection level Up	≤0.8kV	≤1.3kV	≤1.5kV	≤1.8kV	≤2.0kV
Voltage protection level 5kA Up	≤0.6kV	≤1kV	≤1.2kV	≤1.4kV	≤1.6kV
Max. backup fuse	125A gG	125A gG	125A gG	125A gG	125A gG
Response time tA	≤25ns	≤25ns	≤25ns	≤25ns	≤25ns
Operating temperature range Tu	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃
Operating state / fault indication	green / red	green / red	green / red	green / red	green / red
Cross-section area (Min.)	4mm²	4mm²	4mm²	4mm²	4mm²
Cross-section area (Max.)	35mm²	35mm²	35mm²	35mm²	35mm²
For mounting on	35mm Din rail
Enclosure material	Thermal plastic UL94-V0
Degree of protection	IP20	IP20	IP20	IP20	IP20

Product picture:

40ka Surge Protective Device 8/20 SPD Lightning Arrester Application:

• Surge protection device are suitable for lightning and surge protection in AC 50/60Hz.

• The power supply surge protector is suitable for TN-S power supply systems, and factory low voltage power and control system.

• Application of AC power line of house, bank, and telecom tower and so on.

Our Services:

• 17 years global leading profession manufacture of electrical products surge arrester

• All products will be well packed before shipping

• Standard packaging, and you can also tell us your own requirements on packaging

• Faster delivery

• Individually Tested Prior to Shipment

Installation:

• The type 2 arresters must install into sub-distribution boards after main distribution boards containing type 1 arresters.

• For proper operation between type 1 and type 2 arresters at least 10- 15 m cable or wire must be otherwise a decoupling coil have to install between the two devices.

• In areas where storms are frequent, it is strongly recommended to install additional protection systems.

Certificate:

Company profile:

Wenzhou Britec Electric Co., Ltd is a manufacturer and trading company located in Yueqing city, Zhejiang province, we have more than 17 years experiences in SPD producing. Our factory is equipped with advanced machinery, also we created much experience in new product development, so can customize products per your requirements. We know that cooperation, support and service is most important and hence employed experienced and customer friendly sales, this ensures a good understanding of your requirements, on time delivery and ultimately a satisfied customer base. We are not just thriving, but growing day by day, we always provide our customers with highly quality products in affordable cost; we sincerely hope to have you as our esteemed customer and friend.

Laboratory equipment:

Shipping:

FAQ:

1. How can I get a quotation?

--Kindly provide us your details request, leave us an inquiry or email and we will response promptly!

2. How to pay for order?

--T/T, Paypal, L/C, ect.

3. How can I trust you and your company?

--We are focusing on the long term relationship with customers, we have worked with thousands of customers since company built 17 years ago, customers always make highly complimentary remarks

4. What’s the process of order?

--Send us Inquiry→get quotation→payment done→mass production.

5. When can I expect the customized product to be finished?

--Sample: 7-10 working days (Standard).

--Bulk order: 15-30 working days (Standard).

6. Delivery & Shipment

--Air shipping, Couirer (DHL, UPS, FEDEX, TNT, EMS, ect ), Sea shipment(FCL/LCL).