Home Companies Britec Electric Co., Ltd.

15kA Power Lightning Protection Type 2 Surge Protector Surge Arrester

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

15kA Power Lightning Protection Type 2 Surge Protector Surge Arrester

Country/Region	china
City & Province	zhejiang
Categories	Lightning Rod

Product Details

15kA Secondary Power Surge Protector Surge Arrester Lightning Protector

15kA Secondary Power Surge Protector Feature:

• Devices have indicators to advise end of life of the device

• BR-15DP 2P is the Type 2/Class II devices protecting against induced voltage surges (8/20 μs).

• The device meets the requirements of the IEC 61634-1 and EN 61643-11 standards

15kA Secondary Power Surge Protector Technology characteristic:

Specification	BR-15DP 275 2P
Item name	Surge Arrester
SPD dassification according to EN61643-11	Type 2
SPD dassification according to IEC61643-11	Class II
Max continuous 0perating a.c. voltage Uc	275V
Max. discharge current (8/20µs) Imax	15kA
Norminal discharge current (8/20µs) In	5kA
Voltage protection level Up	≤1.3kV
Response time tA	≤25ns
For mounting on	35mm Din rail
Degree of protection	IP20
Operating temperature range Tu	-40℃—80℃
Cross-section area (Min.)	2.5mm²
Cross-section area (Max.)	16mm²
Enclosure material	Thermal plastic UL94-V0

Dimension:

15kA Secondary Power Surge Protector Installation:

• Installation as defined in the standard is simple enough, the device is connected with cables to and from the unit no longer than a meter in total, and a short path to earth will ensure the effective discharge of the surge to earth.

• If a Type 2 SPD is installed and cable lengths are less than 10m, then there is no longer a requirement to fit Type 3 surge protected extension leads. If greater than 10m then type 3 surge protection should be fitted.

• For the most part a simple two pole device for single phase TT or TNS will be enough. In TNCS systems a single pole unit may be sufficient as only the live conductor comes to the property that can bring a threat from outside influences affecting that supply.

Types of Surge Protection Devices (SPD):

Type 1 SPD:

The Type 1 SPD is recommended in the specific case of service-sector and industrial buildings, protected by a lightning protection system or a meshed cage. It protects electrical installations against direct lightning strokes. It can discharge the back-current from lightning spreading from the earth conductor to the network conductors. Type 1 SPD is characterized by a 10/350 µs current wave.

Type 2 SPD:

The Type 2 SPD is the main protection system for all low voltage electrical installations. Installed in each electrical switchboard, it prevents the spread of overvoltage in the electrical installations and protects the loads. Type 2 SPD is characterized by an 8/20 µs current wave.

Type 3 SPD:

These SPDs have a low discharge capacity. They must therefore mandatorily be installed as a supplement to Type 2 SPD and in the vicinity of sensitive loads. Type 3 SPD is characterized by a combination of voltage waves (1.2/50 μs) and current waves (8/20 μs).

Our service:

• Pre-sale Services:

1. Provide free consulting, to resolve the confusion from customers.

2. Mining and carefully study customer's needs, provide detail and suitable design solutions.

• In-sale Services:

1. Try best to meet the reasonable demands by customers.

2. Cooperate friendly with client and satisfy our clients with best quality SPD.

• After-sale Services:

1. Provide 2-year guarantee for products.

2. A complete after-sale service system to help customers resolve the problems during the using time.

Company profile:

Wenzhou Britec Electric Co., Ltd. is a professional engaged in SPD products research and development, design, production and service in the integration of modern professional surge protection production enterprises, production base is located in Yueqing, Zhejiang, China. With OEM/ODM high standard production workshop, has a new standard of high-end production equipment, perfect supporting factory layout is reasonable, the spacious production workshop, according to the international surge protector factory standard production design, is the domestic strong r & d manufacturers.