Home Companies Britec Electric Co., Ltd.

40ka 4P SPD AC 320V Type 2 MOV AC Power Surge Protector

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

40ka 4P SPD AC 320V Type 2 MOV AC Power Surge Protector

Country/Region	china
City & Province	zhejiang
Categories	Other Security & Protection Products

Product Details

40ka 4P SPD AC 320V Type 2 Surge Protective Device MOV AC Surge Protector Device

40ka 4P SPD AC 320V Type 2 Surge Protective Device Product description:

• Class II AC surge protector designed for low-voltage power supply system protection against surges at the boundaries from lightning protection zone 1-2 and higher.

• Simple standard hat rail mounting

• Quick thermal response and perfect circuit cutoff function due to special thermal disconnector design with arc extinguishing device.

• Labelled connections

• Pluggable design, 4 poles, easy replaced without any tools.

• Time of response<25ns.

• High surge current capability with 8/20 us waveform, Imax 40kA.

• Excellent performance

• Visual status indication and optional remote signal contact.

• The color of visible window shows operating status, green means normal, red means abnormal.

• Comply with IEC 61643-11.

40ka 4P SPD AC 320V Type 2 Surge Protective Device Product Details:

	TY150 40 4P	TY275 40 4P	TY320 40 4P	TY385 40 4P	TY440 40 4P
SPD classification according to EN61643-11	Type 2	Type 2	Type 2	Type 2	Type 2
SPD classification according to IEC61643-11	Class II	Class II	Class II	Class II	Class II
Max. continuous operating a.c. voltage Uc	150V	275V	320V	385V	440V
Nominal discharge current (8/20us) In	20kA	20kA	20kA	20kA	20kA
Max. discharge current(8/20μs) Imax	40kA	40kA	40kA	40kA	40kA
Voltage protection level Up	≤0.8kV	≤1.3kV	≤1.5kV	≤1.8kV	≤2.0kV
Voltage protection level 5kA Up	≤0.6kV	≤1kV	≤1.2kV	≤1.4kV	≤1.6kV
Max. backup fuse	125A gG	125A gG	125A gG	125A gG	125A gG
Response time tA	≤25ns	≤25ns	≤25ns	≤25ns	≤25ns
Operating temperature range Tu	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃
Operating state / fault indication	green / red	green / red	green / red	green / red	green / red
Cross-section area (Min.)	4mm²	4mm²	4mm²	4mm²	4mm²
Cross-section area (Max.)	35mm²	35mm²	35mm²	35mm²	35mm²
For mounting on	35mm Din rail
Enclosure material	Thermal plastic UL94-V0
Degree of protection	IP20	IP20	IP20	IP20	IP20

Product picture:

40ka 4P SPD AC 320V Type 2 Surge Protective Device Application:

• TY-40 4P AC SPD is suitably used in the TN-S power supply system of AC 50/60HZ.

• Suitable for system power protection, such as power distribution cabinet, switch cabinet, switch cabinet, AC distribution board, etc.

• To protect from direct and indirect lightning impulse and other transient over voltage.

Our Services:

• 17 years global leading profession manufacture of electrical products surge arrester
• All products will be well packed before shipping
• Standard packaging, and you can also tell us your own requirements on packaging
• Faster delivery
• Individually Tested Prior to Shipment

Installation:

• The type 2 arresters must install into sub-distribution boards after main distribution boards containing type 1 arresters.
• For proper operation between type 1 and type 2 arresters at least 10- 15 m cable or wire must be otherwise a decoupling coil have to install between the two devices.
• In areas where storms are frequent, it is strongly recommended to install additional protection systems.

Certificate:

Company profile:

Wenzhou Britec Electric Co., Ltd is a manufacturer and trading company located in Yueqing city, Zhejiang province, we have more than 17 years experiences in SPD producing. Our factory is equipped with advanced machinery, also we created much experience in new product development, so can customize products per your requirements. We know that cooperation, support and service is most important and hence employed experienced and customer friendly sales, this ensures a good understanding of your requirements, on time delivery and ultimately a satisfied customer base. We are not just thriving, but growing day by day, we always provide our customers with highly quality products in affordable cost; we sincerely hope to have you as our esteemed customer and friend.

Laboratory equipment:

Shipping:

FAQ:

1. How can I get a quotation?

--Kindly provide us your details request, leave us an inquiry or email and we will response promptly!

2. How to pay for order?

--T/T, Paypal, L/C, ect.

3. How can I trust you and your company?

--We are focusing on the long term relationship with customers, we have worked with thousands of customers since company built 17 years ago, customers always make highly complimentary remarks

4. What’s the process of order?

--Send us Inquiry→get quotation→payment done→mass production.

5. When can I expect the customized product to be finished?

--Sample: 7-10 working days (Standard).

--Bulk order: 15-30 working days (Standard).

6. Delivery & Shipment

--Air shipping, Couirer (DHL, UPS, FEDEX, TNT, EMS, ect ), Sea shipment(FCL/LCL).