Home Companies Britec Electric Co., Ltd.

Britec Surge Protective Device Type 3 BR -10DP Series 35mm Lightning Protection Device

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Britec Surge Protective Device Type 3 BR -10DP Series 35mm Lightning Protection Device

Country/Region	china
City & Province	zhejiang
Categories	Solar Chargers

Product Details

Britec New Type 3 Surge Protection Devices BR-10DP Series 35mm Din Rail

Britec Surge Protective Device Feature:

• This product has a one-piece design.

• Protection class: Type 3, Class III.

• Pole number: 2P.

• For DIN rail installation, with remote contact signaling intervention.

• The type 3 SPD has Uoc of 10kV.

• Conforms to IEC61643-11 and EN61643-11.

• Green-Red status indication.

• Different Uc are available 275V, 150V, 75V and 30V for the application in norminal voltage of 230V, 120V, 60V and 24V line to protect the terminal equipments.

Britec Surge Protective Device Product Details:

	BR30-10DP 2P	BR75-10DP 2P	BR150-10DP 2P	BR275-10DP 2P
SPD classification according to EN61643-11	Type 3	Type 3	Type 3	Type 3
SPD classification according to IEC61643-11	Class III	Class III	Class III	Class III
Nominal a.c. voltage Un	24V	60V	120V	230V
Max. continuous operating a.c. voltage Uc	30V	75V	150V	275V
Max. continuous operating d.c. voltage Uc	38V	100V	190V	300V
Nominal discharge current (8/20us) In	5kA	5kA	5kA	5kA
Combined impulse Uoc	10kV	10kV	10kV	10kV
Voltage protection level Up	≤200V	≤500V	≤700V	≤1100V
Response time tA	≤25ns	≤25ns	≤25ns	≤25ns
Operating temperature range Tu	-40℃-80℃	-40℃-80℃	-40℃-80℃	-40℃-80℃
Operating state / fault indication	green / red	green / red	green / red	green / red
Cross-section area (Min.)	2.5mm²	2.5mm²	2.5mm²	2.5mm²
Cross-section area (Max.)	16mm²	16mm²	16mm²	16mm²
For mounting on	35mm Din rail
Enclosure material	Thermal plastic UL94-V0
Degree of protection	IP20	IP20	IP20	IP20
Order Code	B8237	B8235	B8359	B8231
Order Code (With remote signaling)	B8238	B8236	B8234	B8232

Dimension:

Britec Surge Protective Device Application:

• Used for electrical networks, electrical installations, and electronic equipment.

• Protect low-voltage consumer installations from voltage surges of all kinds.

• BR-20DP series surge arrester is installed between LPZ2 and LPZ3, it can provide protection for equipments.

• Installed in to each electrical switch boards and prevents the spread of surges in the electric systems, protecting the loads.

• It can discharge the surge current from the effect of lightning spreading from earth conductor to the network conductors.

Britec Surge Protective Device Advantage:

• Compact single phase surge protector.

• DIN rail compatible.

• Provide the Visual indication of Protection Status.

• High discharge capacity.

• Based on high energy varistor equipped with thermal disconnectors and failure indicator to comply with standards.

• Low residual voltage and quick response.

Our Services:

• 17 years global leading profession manufacture of electrical products surge arrester.

• All products will be well packed before shipping.

• Standard packaging, and you can also tell us your own requirements on packaging.

• Faster delivery.

• Individually Tested Prior to Shipment.

Noted:

• Type 3 surge protective devices are generally installed right in front of the terminal device to be protected.

• Due to differing installation environments, type 3 SPDs are available in a very wide range of designs. For example: in addition to standard DIN rail mounting, there are devices for installation in sockets or for direct mounting on a PCB of the end device.

• The device must be installed by electrically skilled person, conforming to national standards and safety regulations.

• It is recommended that installation should be done under power off condition.

Company Information:

Wenzhou Britec Electric Co.,Ltd. was founded in 2003, it's a professional manufacturer in SPDs. We are specialized in developing and marketing of high quality surge arresters, including AC surge protector, DC surge protection device, data surge protective, LED lightning protection in the market. Welcome all customers over the world to contact us for future business relationship and achieving mutual success!

Certificate:

Shipping:

FAQ:

Q1: Why Choose us?
A1. We have 17 years experiences on SPDs; Absolutely prompt shipping time; OEM/ODM service; Good language communication 24 hours online.

Q2: How to get samples from us?
A2. Samples is not free, but sample fee will be returned if mass order confirmed.

Q3: How to pay for order?
A3. You can pay by TT, Paypal etc.

Q4: What is the delivery time for order?
A4. If we have the products in stock, we could arrange shipping within 5 days. If no stock, 20 days production time, it depends on order quanitiy.

Q5: Do you accept my own design and logo printing?
A5. Yes, any customized design on anywhere of product is welcomed. MOQ is 100pcs.