Home Companies Britec Electric Co., Ltd.

2P Pv Surge Protection Device 40KA DC Surge Protector 500V For PV Solar System

Contact Us

[China]

Trade Verify

Address: Block 1 , BoTongHuiGu industrial Park, Yueqing, Zhejiang ,China 325600

Contact name:Macy Jin

Britec Electric Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

2P Pv Surge Protection Device 40KA DC Surge Protector 500V For PV Solar System

Country/Region	china
City & Province	zhejiang
Categories	Security Product Agents

Product Details

2P Surge Protective Device 20KA DC Surge Protector 500V PV Solar System

2P Pv Surge Protection Device 20KA DC Surge Protector Characteristic:

• In (8/20us): 20kA.

• Imax (8/20us): 40kA.

• Every pole achieves 500V.

• Din-rail mountable.

• Replaceable module.

• IP20 finger-safe design.

• Remote indicator (optional).

• EN / IEC 61643-31: Type 2 / Class II.

• The response time in the 25 nanosecond.

• The shell is made of flame retardant material.

• Consisting of a base part and plug-in protection modules.

• Indicator window is obvious (green is OK, red indicates failure).

• High energy MOVs equipped with specific thermal disconnections and related failure indicators.

2P Pv Surge Protection Device 20KA DC Surge Protector Product detail:

2 Mod	BRPV2-500
SPD classification according to EN61643-31	Type 2
SPD classification according to IEC61643-31	Class II
Max. continuous operating dc voltage Ucpv	500V DC
Nominal discharge current (8/20us) In	20kA
Max. discharge current (8/20us) Imax	40kA
Voltage protection level [(DC+/DC-)→PE] Up	≤2.6kV
Response time tA	≤25ns
Operating temperature range Tu	-40℃-80℃
Operating state / fault indication	green / red
Cross-section area (Min.)	4mm²
Cross-section area (Max.)	35mm²
For mounting on	35mm Din rail
Enclosure material	Thermoplastic UL94-V0
Degree of protection	IP20

Dimension:

2P Pv Surge Protection Device 20KA DC Surge Protector Application:

• Protecting low voltage equipment from surge damages.

• Protect against lightning surge voltages in solar system (photovoltaic power supply system).

• Used in lightning protection of solar photovoltaic power generation system or other DC power supply system and make the system against lightning overvoltage.

• Used to protect all kinds of electrical equipment in the power system from lightning over-voltage, operation over-voltage, power frequency transient over-voltage impact damage to an electrical appliance.

2P Pv Surge Protection Device 20KA DC Surge Protector Advantage:

• High security.

• Quick response.

• Visual indicator.

• Easy installation.

• Stable performance.

• Low residual voltage.

• Fire-retardant materials.

• Remote signaling can be achieved.

• High flow, high safety and stability.

2P Pv Surge Protection Device 20KA DC Surge Protector Installation instruction:

• These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection.

• Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.

Our workshop:

Our company:

Wenzhou Britec Electric Co.,Ltd. specializes in R&D, production, sales SPDs. Products sold at home and abroad, well received by customers. Our mission is to produce highly cost-effective surge protection products for our customers. The company is determined to stick to a principle of "advanced technology and best quality" and provide the customers with perfect lightning arrester products. Britec has and will put customers first.