Ethernet Surge Protector For Protects POE Devices from Lightning
Induced Surges
5V Ethernet Surge Protection Devices Feature:
• Nominal current up to 0.5A.
• Tested standards IEC 61643-21.
• Power-over-Ethernet compatible.
• Housing material: aluminum alloy.
• Network connection: RJ45 connector.
• Operating Temperature: -40°C to +80°C.
• Adheres to cable categories CAT5e, CAT6.
• Protection Modes Line-Line, Line-Ground.
• Nominal Discharge Current (8/20μs): 5 KA.
• Outside Dimensions (W*L*H) 25*25*84 mm.
5V Ethernet Surge Protection Devices Product Details:
| BRRJ45-1 |
Test standards | IEC61643-21 |
Nominal voltage
Un | 5V |
Max.continuous operating d.c.voltage
Uc | 6V |
Max.continuous operating a.c.voltage
Uc | 4V |
Nominal current
IL | 0.5A |
C2 Nominal discharge current (8/20us) per line
In | 5kA |
Voltage protection level [line-line]
Up | ≤30V |
Voltage protection level [line-PG]
Up | ≤500V |
Response time [line-line]
tA | ≤1ns |
Response time [line-PG]
tA | ≤100ns |
Operating temperature range
Tu | -40℃…+80℃ |
Connection (input/output) | RJ45 socket |
Bandwidth | 30 Mbps / 100 Mbps / 300
Mbps |
Insertion Loss | ≤0.3dB |
Enclosure material | aluminium alloy |
Degree of protection | IP20 |
Dimension:
5V Ethernet Surge Protection Devices Application:
• Protect network devices powered from Ethernet such as webcams.
• Protect against include direct lightning strikes, voltage spikes,
or POE overvoltage.
• Protects both transmission and power circuits from lightning
surges on POE compatible devices.
• Protect PSE (power-supply equipment) connected to a network from
transient overvoltage.
• Inserted inline on an RJ45 CAT6/CAT5/CAT5e cable to prevent
damage of electronic networking equipment.
• Protect communication devices connected via Ethernet LAN from
lightning surge entering through network cables.
• Protect a wide array of valuable components such as switch,
router, modem, bridge, repeater, or any part of internet service network.
5V Ethernet Surge Protection Devices Installation:
• It should be properly grounded to work. The Ethernet ground wire
(11 Inch - 12 AWG) on the surge protector needs to be connected to ground through the shortest
path.
• The Line-to-Line Ethernet surge protection mode helps protect
against short circuits between different nodes of the network system while the Line-to-Ground mode protects
against short circuits between the network node and the earth.
Company information:
Wenzhou Britec Electric Co., Ltd. was established in 2003, is a
professional surge protective devices (SPD) manufacture with many
years experiences.We are providing quality products, competitive
price, prompt delivery and excellent service, and looking forward
to even greater cooperation with overseas trade based on mutual
benefits.
Certificate:
Payment & Shipping:
FAQ:
Q1: What is your terms of payment?
A1: T/T, Paypal etc.
Q2: What is your terms of delivery?
A2: EXW, FOB, CIF, CNF.
Q3: How about your delivery time?
A3: Generally, it will take 15 to 30 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q4: Can you produce according to the samples?
A4: Yes, we can produce by your samples or technical drawings.
Q5: Is samples available?
A5: Samples are available, but it is not free.