Dongguan Kodo Tech Co., Ltd |
|
The pump is driven by an AC or DC motor in front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet. The volume of flow is determined by several factors including: the number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Motor Voltage | 12/24V DC |
Type | 3 chamber diaphragm pump, self priming, capable of being run dry |
Mode | Demand or bypass |
Certifications Option | CE Approval |
Liquid Temperature | 140°F (60°C) Max. |
Priming Capabilities | 6 feet (1.8 m) |
Max Pressure | 45psi (3.1bar) |
Max Flow rate | 15lpm (4.0gpm) |
Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
Motor options | 2 pin connector |
On/off switch |
Model | Switch | GPM/LPM | PSI/BAR | Max Draw(A) | Valves | Diaphragm | Ports | Voltage | Wire Connections |
KDP33-G28-12 | Demand | 2.8/10.6 | 45/3.1 | 6 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 12VDC | 2-Pin/Leads |
KDP33-G28-24 | Demand | 2.8/10.6 | 45/3.1 | 3 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 24VDC | 2-Pin/Leads |
KDP33-G30-12 | Demand | 3.0/11.6 | 45/3.1 | 7 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 12VDC | 2-Pin/Leads |
KDP33-G30-24 | Demand | 3.0/11.6 | 45/3.1 | 3.5 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 24VDC | 2-Pin/Leads |
KDP33-G35-12 | Demand | 3.5/13.2 | 45/3.1 | 8 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 12VDC | 2-Pin/Leads |
KDP33-G35-24 | Demand | 3.5/13.2 | 45/3.1 | 4 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 24VDC | 2-Pin/Leads |
KDP33-G40-12 | Demand | 4.0/15.0 | 45/3.1 | 13 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 12VDC | 2-Pin/Leads |
KDP33-G40-24 | Demand | 4.0/15.0 | 45/3.1 | 6.5 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 24VDC | 2-Pin/Leads |
KDP33-G55-12 | Demand | 5.5/20.0 | 70/4.8 | 18 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 12VDC | 2-Pin/Leads |
KDP33-G55-24 | Demand | 5.5/20.0 | 70/4.8 | 9 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 24VDC | 2-Pin/Leads |
KDP33-G28-115 | Demand | 2.8/10.6 | 45/3.1 | 0.6 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 110-120VAC | 3-Pin/Leads |
KDP33-G28-230 | Demand | 2.8/10.6 | 45/3.1 | 0.3 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 220-240VAC | 3-Pin/Leads |
KDP33-G30-115 | Demand | 3.0/11.6 | 45/3.1 | 0.7 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 110-120VAC | 3-Pin/Leads |
KDP33-G30-230 | Demand | 3.0/11.6 | 45/3.1 | 0.35 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 220-240VAC | 3-Pin/Leads |
KDP33-G35-115 | Demand | 3.5/13.2 | 45/3.1 | 0.8 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 110-120VAC | 3-Pin/Leads |
KDP33-G35-230 | Demand | 3.5/13.2 | 45/3.1 | 0.4 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 220-240VAC | 3-Pin/Leads |
KDP33-G40-115 | Demand | 4.0/15.0 | 45/3.1 | 1.3 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 110-120VAC | 3-Pin/Leads |
KDP33-G40-230 | Demand | 4.0/15.0 | 45/3.1 | 0.7 | EPDM/Viton | Santoprene | 1/2"-14 MNPT | 220-240VAC | 3-Pin/Leads |
Consult factory for other available models |
2.8GPM
PRESSURE | FLOW | CURRENT | ||
PSI | BAR | GPM | LPM | APMS |
0 | 0 | 2.67 | 10.11 | 3.6 |
10 | 0.69 | 2.30 | 8.71 | 5.8 |
20 | 1.38 | 1.98 | 7.49 | 6.7 |
30 | 2.07 | 1.67 | 6.32 | 7.5 |
40 | 2.76 | 1.37 | 5.19 | 8.1 |
45 | 3.10 | 0 | 0 | 0 |
3.5 GPM | ||||
PSI | BAR | GPM | LPM | Amps |
OPEN | 0.2 | 3.6 | 14.20 | 4.3 |
10 | 0.7 | 2.81 | 10.85 | 4.7 |
20 | 1.4 | 2.42 | 9.34 | 6.2 |
30 | 2.1 | 2.09 | 8.06 | 7.1 |
40 | 2.8 | 1.61 | 6.21 | 8.3 |
45 | 3.06 | OFF | OFF | 0 |
DC pumps:
AC pumps:
Key | Description | Quantity |
A | Pump Head Assembly | 1 |
B | Valve Assembly | 1 |
C | Diaphragm Assembly | 1 |
D | Motor Assembly | 1 |
Key | Description | Quantity |
1 | Pressure switch | 1 |
2 | Diaphragm of Pressure Switch | 1 |
3 | Pump Head | 1 |
4 | Diaphragm | 1 |
5 | Rubber Feet | 1 |
6 | Motor | 1 |
Unit Pump Weight | 4.24 lbs (1.92 kg) |
Selling Unit Size (L x W x H) | 8.5"x 5.63"x 5.12 (26.4 x 14.3 x 13 cm) (Box Package) |
Selling Unit Weight | 4.77 lbs (2.16 kg) |
Master Carton Size (L x W x H) | 23.62"x 10.83"x 11.5" (60 x 27.5 x 29.2 cm) |
Master Carton Qty | 8 pcs |
Master Carton Weight | 38.1 lbs (17.28 kg) |
Chemical Resistance Code | Max Temperature Resistance Code |
A —— Excellent B —— Good C —— Ordinary × —— Unacceptable - —— Unusable | 1 —— 20℃(68F) 2 —— 40℃(104F) 3 —— 60℃(140F) 4 —— 80℃(176F) 5 —— 100℃(212F) 6 —— 120℃(248F) |
CHEMICAL | MATERIAL | |||||||
PP | PTFE | FKM | NBR | EPDM | 95 Ceramic | |||
Sulfuric Acid | 0-10% | A4 | A6 | A6 | B2 | A4 | A5 | |
10-75% | A3 | A6 | A4 | X | A3 | A5 | ||
75-100% | B2 | A4 | A4 | - | B2 | A5 | ||
Nitric Acid | 10% | A3 | A5 | A5 | X | A2 | A5 | |
30% | A2 | A6 | A6 | X | A2 | A5 | ||
50% | B2 | A3 | A1 | X | X | A5 | ||
Hydrochloric Acid | 0-25% | A4 | A6 | A3 | B1 | C3 | A5 | |
25-40% | A4 | A6 | A2 | X | C2 | A5 | ||
Hydrofluoric Acid | 10% | B2 | A6 | A3 | X | A3 | - | |
30% | C2 | A6 | A4 | - | B3 | - | ||
60% | X | A6 | A4 | - | C2 | - | ||
Acetic Acid | 20% | A2 | A6 | B1 | B2 | A2 | A5 | |
80% | B1 | A6 | X | - | - | A5 | ||
Sodium Hydroxide | 20% | A3 | A6 | B1 | B2 | A3 | - | |
50% | A3 | A6 | X | B1 | A4 | - | ||
Bromine Water | C1 | A3 | A2 | - | X | A1 | ||
Ethyl Alcohol | A2 | A3 | A3 | X | B3 | A3 | ||
Acetone | A2 | A6 | X | - | B2 | A3 | ||
Freon 12 | X | A6 | A1 | X | B1 | A4 | ||
Aluminum Chloride | A4 | A6 | A5 | B4 | A4 | A4 | ||
Ammonia Liquid | A1 | A6 | C1 | B4 | B3 | A3 | ||
Aqua Regia | C2 | A5 | B2 | - | C2 | A4 | ||
Formaldehyde | A4 | A6 | A4 | X | A4 | A4 | ||
Gasoline | X | A6 | B3 | B3 | X | A4 | ||
Kerosene | A1 | A6 | A1 | B1 | X | A4 | ||
Methyl Alcohol | A3 | A6 | B2 | B4 | A3 | A5 | ||
Toluene | C1 | A4 | B1 | - | X | A5 | ||
Trichloroethylene | C1 | A6 | A1 | - | X | A4 | ||
Xylene | X | A6 | B1 | - | X | A5 | ||
Nitric Acid Anhydrous | C1 | A3 | A1 | - | X | A5 | ||
Oleum | X | A6 | A4 | - | X | A5 | ||
Potassium Hydroxide | A4 | A6 | B1 | C2 | A5 | - |
Widely used in general industrial equipment, medical equipment,
chemical equipment, agricultural (lawns and gardens), tourist
vehicles, special vehicles, ships, beverage, vehicle cleaning,
carpet cleaning, floor cleaning, water purification and water
treatment equipment.
1. Production of agricultural use electric sprayer, pressure
sprayer can also be hand modified electric sprayer (pressure
sprayer in hand directly on the micro-pumps, adding a battery or
hand lamp can be).
2. Solve vehicles, ships, yachts, boats, etc. in use diet, wash,
shower, toilet, wash water.
3. Food and beverage processing and handling equipment, to achieve
the transfer of liquid food, distribution, filling and so on.
4. Domestic water supply. For example, water-saving toilet,
water-saving toilet, electric toilet, pressurized water system.
5. Solar energy industry.
6. Water purification industry. For example, purification
equipment, water treatment equipment, drinking fountains, water
machines. For towel disposal, drinking fountains, Coke machines,
juice machines, dishwashers, disinfection machines, solar bonsai,
car washing and other manufacturers supporting the glass.
7. Other liquid transfer needs, as well as measurement of spray
equipment and systems. For example, garbage trucks, water truck,
carpet cleaning equipment, floor cleaning equipment, cleaning
equipment, vehicles, road construction equipment, medical
equipment, chemical equipment, chemical equipment, disinfection
equipment, cooling systems, pressurization systems.