Automatic Secondary Packaging System , Bottle Tunnel Pasteurization Equipment

Automatic Bottle Spray Pasteurizer Cooling Tunnel

Description:

Automatic bottle spray pasteurizer cooling tunnel is used for carbonated drink, juice, tea beverage production line, makes the temperature of hot filling drink 85ºC down to 35ºC-40ºC or the cold filling drink up to 30ºC.Its working process can be divided into 3 stages, circulating hot water spray, warm water precooling, cool water cooling, It is suitable for cooling all kinds of bottle and canned juice and carbonated beverage. It equips with "Rexnord"(American famous brand)chain plate for option. The main body is made of excellent stainless steel, running reliable and in a beautiful appearance.

Features:

Bottle Warmer is good choice plastic bottle, glass bottle and cans beverage filling line. Because carbonated soft drink usually adopts low-temperature (2ºC-5ºC) filling, but ambient temperature of workshop is much higher, so it is very easy to condensed dew on bottle surface which will bring trouble to the downstream as labeling. Especially, if using packing, the dew will make carton wet to cause serious damage. Therefore, after the filling machine, it is necessary to use a bottle warmer to heat the bottle to the ambient temperature. The warmer is tunnel type showering equipment which heats the bottle through spraying hot water for heat exchange. It usually has 3 temperature zones( more zones are possible). After heated by section, the bottle's temperature could achieve ambient temperature, usually design for 30-35 ºC. Bottle warmer is mainly composed of machine base, conveying chain, transmission system, water storage flume, recycle pump, showering device, heating device and pipes. Exchanger could adopt steam plate type exchanger and electrical type exchanger.
The purpose of the bottle warmer is to increase bottle temperature so as to remove condensed water from bottle after cold filling, so make sure the containers' surface for the convenience of sticking tags and to ensure the bottles are dry and clean when put into carton boxes while maintaining the flavor and nutrition of the beverage unchanged.

Main Technical Parameters

1.Production Capacity: customized

2.Chain-to-ground height: H=1050±50mm

3.Rack height: according to can height

4.Rack length: 1600mm (according to customers process requirements)

5.Rack width: 2000mm

6.Compressed air source: 0.8Mpa

7.Gas consumption:0.05m3/min