Active Member
|
[China]
Address: No. 101, Beijing East Road, Economic and Technological Development Zone, Siyang County, Jiangsu Province, China
Contact name:Ada Jiao
Sunrise Intelligent Equipment Co., Ltd |
|
|
1200 Can/Min Empty Can Inspection Equipment , SUS304 Can Testing Equipment
Equipment overview:
The empty can inspection machine integrates the most
advanced camera and optical technology in the world, and judges
whether the inspection item is qualified through the intelligent
image analysis system and the expert decision system of the
high-speed computer.
The equipment is mainly composed of a negative
pressure conveying part, a detection device (including the
detection of foreign objects in the can and the can mouth), a
man-machine interface, an industrial computer, a rejection device
and a power distribution cabinet, etc., which is suitable for the
detection of empty cans in a high-speed filling production line.
Principle of empty can detection:
When the empty can enters the foreign body detection
area in the can, the sensor gives the camera a trigger signal,
where the ring light source lights up, and the camera takes a frame
of images of the inner wall and bottom area of the can, and
transmits the image to the industrial computer. The industrial
computer performs the image processing. Real-time processing to
determine whether there are foreign objects in the can.
When the empty can enters the inspection area of
the can mouth, it is the same as the previous station. The
high-speed camera acquires the image of the can mouth under the
low-angle circular light and transmits it to the industrial
computer for processing. Finally, a comprehensive judgment of the
two inspection stations As a result, if it is a defective product,
when the detected can enters the reject area, the reject device
rejects the defective product to the defective product collection
station. If it is a genuine product, enter the next production
process.
Technical parameters and features:
| Dimensions(L*W*H): | 838*868*2524mm |
| Body material: | SUS304; |
| Machine power: | 0.7KW; |
| External power supply: | AC220V/single phase; |
| Power frequency: | 50/60HZ; |
| Maximum speed: | 1200 cans/min; |
| External air source: | 0.5Mpa; |
| Gas consumption: | 0.01L/time |
Accessory brands:
| CCD camera: | BAUMER, Germany; |
| Lens: | Japanese Computar; |
| Photoelectric: | Japan Omron; |
| Signal lights, circuit breakers: | Schneider; |
| Light source: | Jingqing; |
| Light source controller: | V-Light; |
| Industrial air conditioner: | Australia Leizig; |
| Cylinder: | Japan SMC; |
| Solenoid valve: | American MAC; |
| Other: | MISUMI, PHOENIX |
