Decorative Stainless Steel Sheet mirror Etching 4x10 Stainless
Steel sheet
Etching is a process of using chemicals to remove some areas of a
metal surface, creating a pattern or design. GRAND as the ability to produce etched stainless steel sheet and
other metal sheets with precise and long-lasting etched patterns.
The patterns are finished by applying an electrochemical technique,
which is using a protective film of acid resistance to partially
cover the
surface of the metal. The exposed areas are etched by acid to
remove a thin layer of metal, the surface becomes dull and matte,
and the concealed areas are protected by the film and retain their
original condition, the non-etch areas can be finished with some
specified colors before or after the etching process. Such a
contrast creates a stunning pattern, which can be designed as a
specified effect. The etched metal sheet is an ideal material for
decoration purposes such as wall cladding, ceilings, furniture,
elevator interiors, and more.
Here are the steps to etch stainless steel sheet:
1. Clean the stainless steel sheet with a degreaser to remove any
oils, fingerprints, or dirt that may interfere with the etching
process.
2. Cut a piece of adhesive vinyl or use a laser-cut stencil to
create your desired design. Peel off the backing and carefully
stick the vinyl onto the surface of the stainless steel sheet.
Alternatively, you can use a resist to protect the parts of the
sheet that you want to remain unetched.
3. Put on your protective gear, including gloves, goggles, and an
apron. Etching solution can be dangerous if it comes in contact
with your skin or eyes.
4.Apply the etching solution to the exposed areas of the stainless
steel sheet. You can use an applicator brush or spray bottle to
apply the solution evenly over the surface. Follow the instructions
on the etching solution for how long to leave it on the surface
before rinsing.
5. Rinse the stainless steel sheet with water to remove the etching
solution. Be sure to dispose of the
solution properly according to local regulations.
6. Peel off the vinyl or resist to reveal the etched design on the
stainless steel sheet.
7. If desired, you can use a metal polish to clean up any residue
left behind by the etching process.
| Etched Titanium Stainless Steel Sheet mirror Etched Stainless Steel
sheet decorative 4x10 stainless steel sheet |
| Stainless steel (201#, 304#, 316#) |
| 1000mm*2000mm/1500mm*3000mm/1220mm*2440mm/ 1220mm*3050mm/Customized (As your inquiry) |
| Titanium gold, rose gold, black titanium,sapphire blue,bronze,green
(PVD COLOR COATING CAN BE USED INDOOR ANT OUTDOORS FOR MORE THAN 20
YEARS WITHOUT FADING) |
| Hairline(brushed),8k mirror, Etching,Embossed,Vibration, No 4
brushed, Sand blasting, PVD coating,etc. |
| Decorating Hotel, Villa, KTV, Engineering decoration, decorating
ceiling |
| Waterproof + fumigation-free wooden case |
| 15-20 days after confirm orders |
For 18 years, we never give up our pursuit for metal arts. For us
every decoration project means a challenge.
We remain using metal to bring more beauty to decorations, and then
let art integrate into our works and space art add warmth to our
life.