|
[China]
Trade Verify
Address: No.7, Lane 3, North of LianXi Village, Dongpu Town, Tianhe District, Guangzhou, China
Contact name:Alina
Guangzhou Suncar Seals Co., Ltd. |
|
Verified Suppliers
|
|
|
CA4F8420 4F-8420 4F8420 Packing For Models 6A 824C 966C D7G C.A.T Seal
| Product Name | C.A.T Packing |
| Part Number | CA4F8420, 4F-8420, 4F8420 |
| Model Number | C.A.T 16, 44, 46, 613, 621, 621B, 623B, 627B, 630B, 631C, 633, 651, 666, 6A, 7A, 8 SR, 824C, 824S, 834B, 8A, 966C, 977, D6D, D6E, D6E SR, D6G SR, D6G2 XL, D7F, D7G, D9G |
| Material | PU, Rubber, PTFE, NBR, HNBR, ACM, VMQ |
| Place of Origin | China(Mainland) |
| Brand name | SUNCAR |
| Packing | PP bag inside, carton box outside |
| Shipping Mode | By air, by sea, by express(FedEx, UPS, DHL, TNT, etc.) |
| Payment Terms | Western Union, Paypal, T/T, Transfer |
| CertifiC.A.Tion | ISO9001 |
| Warranty | Unavailable |
| Customized | OEM & ODM are welcomed |
| C.A.Tegory Group | Hydraulic oil seal |
| Condition | New, genuine new |
| Sample | Available |
| Applicable Industries | Building material shops, machinery repair shops, retail, construction work... |
| Feature | High sealing performance, wear resistance, heat resistance |
| Size | 63.50*82.55*25.40 |
Hydraulic Seal Installation Requirements:
(1) The sealing surface of hydraulic seal gasket and flange should be clean.
(2) The outer diameter of the hydraulic seal gasket should be smaller than the flange sealing surface, and the inner diameter should be slightly larger than the pipe inner diameter.
(3) The pretension of the gasket shall not exceed the design requirements.
(4) Torque wrenches are best used when packing asbestos gaskets.
(5) When installing the gasket, tighten the nuts one by one.
(6) In case of leakage, step-down treatment must be carried out after installation, and the sealing gasket must be replaced or adjusted.
Related Parts:
| Pos. | Part No | Qty | Parts name |
| 1 | 3J-6559 | [2] | CAP-BEARING |
| 2 | 8E-9212 B | [32] | SHIM (0.8-MM THK) |
| 3 | 9T-2795 | [1] | CYLINDER AS |
| 7J-7816 | [1] | YOKE AS | |
| 4 | 5F-1678 | [1] | SEAL-O-RING |
| 5 | 0T-0055 | [4] | BOLT (3/8-16X4.25-IN) |
| 6 | 5M-2894 | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
| 7 | 5J-7893 | [1] | TUBE AS |
| 8 | 0S-1594 | [1] | BOLT (3/8-16X1-IN) |
| 1D-4717 | [1] | NUT (3/8-16-THD) | |
| 9 | 5H-3252 | [1] | SEAL-O-RING |
| 10 | 4F-8420 B | [1] | PACKING |
| 11 | 4F-8421 B | [6] | SHIM (0.25-MM THK) |
| 12 | 167-2463 | [1] | SEAL-WIPER |
| 13 | 7J-3169 | [1] | ROD AS |
| 14 | 3B-2968 | [8] | BOLT (3/4-10X3.5-IN) |
| 5P-8248 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 15 | 2A-4639 | [4] | BOLT (3/8-16X1.625-IN) |
| 16 | 2J-3243 | [1] | RETAINER |
| 17 | 1D-4627 | [4] | BOLT (7/8-9X3-IN) |
| 5P-8249 | [4] | WASHER-HARD (24X41.5X4-MM THK) | |
| 18 | 5J-7889 | [1] | HEAD |
| 19 | 4J-4500 | [2] | WASHER (1.757X3X0.25-IN THK) |
| 20 | 5J-4989 | [1] | SEAL AS |
| 21 | 9T-2787 | [1] | PISTON AS |
| 6T-9609 | [1] | SPRING | |
| 22 | 5J-0014 | [1] | RING-WEAR |
| 23 | 5J-5731 | [1] | LOCKNUT (1-3/4-12-THD) |
| 24 | 2K-3258 | [1] | RING-BACKUP |
| B | USE AS REQUIRED | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE |
Product Show:
