Guangzhou Suncar Seals Co., Ltd. |
Verified Suppliers
|
|
D30AM-17 Komatsu 113-30-34130 Adjuster Sealing Kit Dozer Track Cylinder Seal Kit
Product Name | Track Adjuster Seal Kit |
Model Number | Komatsu D30AM-17, D31A-16, D31E-17, D31P-16, D31PL-16, D31PLL-18, D31Q-16, D31S-16 |
Place of Origin | China(Mainland) |
Brand name | SUNCAR |
Packing | PP bag inside, carton box outside |
Shipping Mode | By air, by sea, by express(Fedex, UPS, DHL, TNT, etc.) |
Part Number | 113-30-34130 |
Payment Terms | Western Union, L/C, T/T, Money Gram, D/A, D/P |
Size | Standard size |
Applicable Industries | Construction works, machinery repair shops, retail, other |
CertifiC.A.Tion | ISO9001 |
Condition | 100% new |
C.A.Tegory | Seal kits, seal |
Warranty | Unavailable |
OEM and ODM | Welcome |
Feature | Oil & high pressure & high temperature resistant |
Preservation Notice | Closed, dry and avoid the sun |
AppliC.A.Tion | Bulldozer |
Parts On Group:
Pos. | Part No | Qty | Parts name |
1 | 113-30-34110 | [1] | BRACKET,L.H. |
113-30-34120 | [1] | BRACKET,R.H. | |
2 | 113-30-34230 | [1] | CYLINDER,L.H. |
113-30-34130 | [1] | CYLINDER,L.H. | |
113-30-34240 | [1] | CYLINDER,R.H. | |
113-30-34140 | [1] | CYLINDER,R.H. | |
3 | 113-30-34210 | [2] | SPRING |
113-30-24130 | [2] | SPRING | |
4 | 113-30-24161 | [2] | PISTON |
5 | 113-30-34170 | [2] | BAR |
6 | 09370-00050 | [2] | U-PACKING |
7 | 04064-03515 | [2] | RING |
8 | 07155-00515 | [4] | RING |
9 | 113-30-34150 | [2] | YOKE ASSEMBLY |
10 | 113-30-34160 | [1] | ROD |
11 | 07177-05030 | [2] | BUSHING |
12 | 113-30-24240 | [2] | SEAL |
13 | 113-30-24250 | [2] | SPACER |
14 | 04065-06220 | [2] | RING |
15 | 113-30-34190 | [2] | PLATE |
16 | 01010-31645 | [8] | BOLT |
17 | 01643-31645 | [8] | WASHER |
20 | 113-30-24140 | [2] | PLATE |
21 | 07959-20001 | [2] | VALVE |
07959-20000 | [2] | VALVE | |
22 | 01010-31020 | [4] | BOLT |
23 | 01602-01030 | [4] | WASHER |
24 | 01010-31640 | [12] | BOLT |
26 | 04020-01638 | [4] | PIN |
Hydraulic Seal Installation Requirements:
1. The sealing surface of hydraulic seal gasket and flange should be clean.
2. The outer diameter of the hydraulic seal gasket should be smaller than the flange sealing surface, and the inner diameter should be slightly larger than the pipe inner diameter.
3. The pretension of the gasket shall not exceed the design requirements.
4. Torque wrenches are best used when packing asbestos gaskets.
5. When installing the gasket, tighten the nuts one by one.
6. In case of leakage, step-down treatment must be carried out after installation, and the sealing gasket must be replaced or adjusted.
Welcome to contact us, we can provide the high quality and best price!