Home Companies SHENZHEN BEST ELECTRIC TECHNOLOGY CO., LTD.

16S200A BMS with Relay, with SMBus,I2C/HDQ Communication Protocol For 59.2V Li-ion and Li-Polymer Battery Packs

Active Member

Contact Us

[China]

Address: NO.13,RUYI ROAD,XINLIAN COMMUNITY,LONGCHENG STREET,LONGGANG,SHENZHEN

Contact name:Apple

SHENZHEN BEST ELECTRIC TECHNOLOGY CO., LTD.

16S200A BMS with Relay, with SMBus,I2C/HDQ Communication Protocol For 59.2V Li-ion and Li-Polymer Battery Packs

Country/Region	china
City & Province	shenzhen guangdong
Categories	Batteries

Product Details

Programmable BMS with SMBus , I2C/HDQ Communication protocol

1.Battery Management System for 16S 59.2V Li-ion and Li-Polymer battery pack;

2.BMS applies for 16 configuration Li-ion and Li-Polymer battery pack;

3.To prevent the battery packs from overcharge,overdischarge,over current, over temperature ,short circuit ;

4.With cell balance/equilibrium function;

5.Compatible with all the Li-ion and Li-Polymer cells.

6.How balancing function works? after battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level. Therefore, it helps cells have longer service life.

7.This BMS is designed for 3S ~ 96S Battery packs, can be used on Li-ion, Li-Polymer, LiFePO4, with max. continuous discharge @ 500A, and it is integrated with SMBUS, I2C, HDQ optional communications protocol for battery pack monitoring, fuel/gas gauge management, communicating with your applications, can accurately read your battery pack’s SOC and SOH information. The communication function is removable, can remove it if there is no need.

8.BEST-#### with replay is designed as high current BMS, the mother board BMS works with the Relay, can carry 500A continuous current with DC voltage ranges from DC12V to DC720V, peak current can carry 2000A.

Specifications

Item	Contents		Criteria (Adjustable)
1	Model	BEST-####	16S
2	Voltage	Charging voltage	67.2V
3	Current	Maximal continuous charging current	200A (adjustable)
		Maximal continuous discharging current	500A (adjustable)
		Current consumption	≤200μA
4	Overcharge Protection	Over charge detection voltage	Adjustable(depends on battery type)
		Over charge detection delay time	Adjustable(depends on battery type)
		Over charge release voltage	Adjustable(depends on battery type)
5	Over Discharge Protection	Over discharge detection voltage	Adjustable(depends on battery type)
		Over discharge detection delay time	Adjustable(depends on battery type)
		Over discharge release voltage	Adjustable(depends on battery type)
6	Over Current Protection	Over current detection voltage	Adjustable(depends on battery type)
		Over current detection current	Adjustable(depends on battery type)
		Detection delay time	Adjustable(depends on battery type)
		Release condition	Adjustable(depends on battery type)
7	Short Circuit Protection	Detection condition	Adjustable(depends on battery type)
		Detection delay time	Adjustable(depends on battery type)
		Release condition	Cut load, automatically recover
8	Balance/Equilibrium	Balance voltage for single cell	Adjustable(depends on battery type)
8	Balance/Equilibrium	Balance current for single cell	Adjustable(depends on battery type)
9	Balancing ON/OFF	When the balancing LEDs are on then the balancing function will get started
10	Temperature	Operating temperature range	-40~+85°C
10	Temperature	Storage temperature range	-20~ +125°C
11	Capacity Display	Press Battery Capacity checking Switch to dispaly capacity by LEDs
12	Size (LWT)	L214.5mmW143mmT37mm