Home Companies Yixing Boyu Electric Power Machinery Co.,LTD

2×70kN Cable Stringing Tension Equipment For Transmission Line

Yixing Boyu Electric Power Machinery Co.,LTD

Contact Us

[China] country

Trade Verify

Contact name:Green Lu

Inquir Now

Yixing Boyu Electric Power Machinery Co.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

2×70kN Cable Stringing Tension Equipment For Transmission Line

Country/Region china
Categories Other Hardware
InquireNow

Product Details

Cable Stringing Equipment Tension Equipment for Transmission Line

 

Performance Parameter

Main technical performance

Tension condition

  • Max intermittent tension: 2×70kN
  • Max continuous tension: 2×65kN
  • Speed at max tension: 2.5km/h
  • Max speed: 5km/h
  • Tension at max speed: 2X35kN

Traction condition

  • Max reverse pulling force: 2×60kN
  • Speed at max pulling force: 2.5km/h
  • Max reverse pulling speed: 5km/h
  • Pulling at max speed: 2×30kN

Transmission System

With closed double-loop hydraulic transmission system and planet decelerator, tension wheel is driven by primary gear. hen inverted, the magnitude of reverse traction force is led by exit pressure of pump. In tension condition, hydraulic motor rotation is driven by the tension wheel; the magnitude of tension is controlled by regulating the motor exit pressure.

Main pump:

  • Type: Hydraulic control bidirectional variable plunger pump( German Rexroth)
  • Model: A4VG90HD3

Hydraulic motor:

  • Type: Two-way Quantitative Plunger Piston Motor( German Rexroth)
  • Model: A2FM90

Speed reducer:

  • Type: planet Gear Decelerator
  • Model: 307 L2
  • Reduction ratio: 17.4
  • Brake opening pressure: 2.5MPA

Structure Parameters

  • Bull-wheel diameter: 1500mm
  • Groove numbers: 2×8
  • Max conductor diameter: 40mm
  • Weight of the whole machine: 10500kg
  • Overall dimension (length, width, height): 5300X2300X2600

Electrical System

  • System voltage: 24V
  • Storage battery: 6-QA-110
  • Diesel engine starting: 24V electric starting

Engine

  • Model: Cummins 4BT3.9-C105
  • Nominal speed: 2800r/min
  • Nominal power (1 hour): 77KW

 

 

Safe Operation Rules

Only the workers who are familiar with safe operation rules and maintain demand of this tension machine and are professionally trained could be allowed to operate.

 
  • When operating tensioner, you shall control handle and adjust pressure steadily and avoid over-violent and quick force and brutal operation. When tension laying , special attention shall be paid to prevent reducing or increasing tension to a large extent to result in conductor fluctuating greatly and damaging span frame and other buildings.

 

  • Both operators of tensioner and puller shall communicate each other to avoid that puller begins to work under operating condition of tensioner not tension laying and cause serious accident.

 

  • Absolutely prohibit using reverse pulling function to brake.

 

  • Regularly check the fixed bolt of the nylon sector, prevent loose bolt to damage the wires and cause unnecessary losses.

 

  • When tensioner works, it is prohibited that operators give up operating or leave puller.

 

  • When tension stringing, the pull handle should be middle position. It is forbidden to throw the handle to prevent to cause serious accident as running line.

 

  • In the process of tension laying , continuously observe each pointer; water temperature of engine shall be not more than 95℃; hydraulic oil temperature shall be not more than 85℃; Oil-filling pressure shall be not less than 1Mpa and not more than 1.8Mpa; brake oil pressure shall be not less than 1.8Mpa and not more than 4Mpa. Otherwise, the machine shall be stopped immediately for check.

 

  • When tensioner operates, rotary speed of engine keeps around 1200r/min to maintain higher power and prevent overheating of hydraulic oil.

 

  • In the process of tension laying, it is strictly prohibited that brake handle is put in brake position; otherwise, serious accident will be caused.

 

  • Under operating condition of driving, to change driving direction of tensioner shall be carried out after tension pulleys stop completely.

 

  • Pressure of each safety valve shall be preset, avoid random adjustment! If accidents, for example, tensioner fails to work, are caused from adjusting valve without permission, it will bring you much trouble and loss.

 

Hot Products

Hydraulic Puller Transmission Line Stringing Equipment Cummins Engine TY90 Hydraulic Puller ...
Transmission Line Stringing Equipment TY90 90kN Hydraulic Puller How is stringing transmission line ...
Transmission Line Stringing Equipment Hydraulic Puller Max Intermittent Pulling Force 180kN Purposes ...
Transmission Line Stringing Equipment TY180 Hydraulic Cable Puller Characteristics: 1. The puller is ...
Stringing Equipment 180kN Hydraulic Puller Machine For Transmission Line Features: 1. The liner of ...
TY180 Hydraulic Puller Machine With Cummins Engine For Overhead Line Application: Hydraulic ...