|
[China]
Trade Verify
Contact name:Green Lu
Yixing Boyu Electric Power Machinery Co.,LTD |
|
Verified Suppliers
|
|
|
Stringing Equipment Hydraulic Puller For Transmission Line Max Speed 5km/h
| Characteristics | |
| Groove number | 8 |
| Bull-wheel diameter | 540mm |
| Max rope diameter | 21mm |
| Total weight | 4350kg |
| Max diameter of rope reel | 1400mm |
| Overall dimension (length*width*height) | 4500×2100×2450mm |
Performance | |
Max pull | 100kN |
Max continuous pull | 90kN |
Speed at max pull | 2.5km/h |
Max speed | 5km/h |
Pull at max speed | 40kN |
| Hydraulic Transmission | Closed hydraulic circuit for step less speed variation in both rotating directions. |
| This machine is provided with a pull pro-setting system that maintains the pre-set pulling value (also when the speed is reduced to "0") by automatically adjusting the operation speed according to the friction and unexpected loads which may occur. |
| Engine | |
| Diesel | 118kw(158hp) Euro II, 4-stroke cycle, turbo-charged |
| Cooling system | liquid |
| Electrical system | 24V |
| Main configuration | |
| Engine | Cummins |
| Hydraulic pump | German Rexroth |
| Main motor | German Rexroth |
| Tail bracket hoisting motor | American Eton |
| Operating handle | German Rexroth |
| Speed reducer | German Rexroth |
| Hydraulic meter | German |
| Configuration | Control instruments for hydraulic system and diesel engine |
| Hydraulic front stabilizer | |
| Hydraulic dynamometer with set-point and automatic control of maximum pull | |
| Grounding connection point | |
| On board reel winder with automatic level wind, suitable for standard reel mod. 1100 and 1400 | |
| Hydraulic oil cooling system |
| Additional Devices | Lighting system for the trailer |
| Hydraulic rope clamp for reel change | |
| Digital speed and meter counter (extra charge) | |
| Swivel guide rope roller | |
| Trailer for towing at max speed of 30 km/h | |
| Extra shaft |
| Additional Devices | The chassis provided with Brake, back lights and mudguard, with a single point lift to allow lifting with a crane. |
| Hydraulic system for drum stand control with flat face quick action couplings | |
| Lockable toolbox, Holding fixture for hose kit, Grounding plate, Acoustic insulation | |
| Cable and radio remote control fully replacing all controls at machine panel. | |
| Auxiliary Hydraulic system (700/1000 bar) for power pressing tool | |
| Remote diagnosis via GSM network with GPS modem, Synchronization system | |
| Biodegradable hydraulic oil, Allowable tension indictor, Overload tension alarm, First Aid Kit | |
| Manufacturer's recommended tools. | |
| Manufacturer's workshop maintenance manual, in English | |
| Manufacturer's routine spares for five years' duty (filters, bulbs, etc.). |
