|
[China]
Trade Verify
Contact name:Green Lu
Yixing Boyu Electric Power Machinery Co.,LTD |
|
Verified Suppliers
|
|
|
TY1x120III 120KN Hydraulic Cable Tensioner Machine For Overhead Stringing Germany Rexroth Hydraulic Motor
Performance Parameter
| Main technical performance | |||
| Maximum intermittent tension: 130KN | |||
| Maximum continuous tension: 120KN | |||
| Corresponding speed: 2.5km/h | |||
| Maximum payoff speed: 5km/h | |||
| Maximum back pulling force: 90kn | |||
| Corresponding tension: 60KN | |||
| Diameter of tensile force wheel: 1500mm | |||
| Maximum applicable diameter of wire: 40mm | |||
| Maximum back pulling speed: 3km/h | |||
| Total weight: 8100kg | |||
| Groove numbers: 15 | |||
| Transport dimensions: 5300*2300*2600mm | |||
| Engine | |||
| Model: Cummins 4BTA3.9-C130 | |||
| Rated power: 97kw/2500rpm | |||
| Transmission System | |||
| With closed double-loop hydraulic transmission system and planet decelerator, tension wheel is driven by primary gear. With inversion, the magnitude of reverse traction force is led by exit pressure of pump. | |||
In tension condition, hydraulic motor rotation is driven by the tension wheel; the magnitude of tension is controlled by regulating the motor exit pressure. | |||
| Main pump | |||
| Type: Hydraulic control bidirectional variable plunger pump(Germany Rexroth) | |||
| Model: A4VG71EP4/32R | |||
| Hydraulic motor | |||
| Type: Two-way Quantitative Plunger Piston Motor (Germany Rexroth) | |||
| Model: A2FM180/61W | |||
| Speed reducer | |||
| Type: planet Gear Decelerator (Italy Bonfiglioli) | |||
| Model: 310 L2 | |||
| Reduction ratio: 28 | |||
| Brake opening pressure: 1.8MPA | |||
| Electrical System | |||
| System voltage: 24V | |||
| Storage battery: 6-QA-110(2 sets) | |||
| Diesel engine starting: 24V electric starting | |||
| Oil and Capacity Table | |||
| Oiling position | Kinds of oil | Capacity | Oil level observation |
| Oil tank | Winter:-10# or -35# light diesel oil; Summer:0# or 10# light diesel oil; | 145L | Oil level gauge |
| Hydraulic oil tank | Great Wall Brand 46# Hydraulic Oil | 250L | Oil-height detector |
| Engine sump | CD level special for diesel engine | 10.5L | Oil gauge dipstick |
| Oil lubrication position | N0.2 lubricating oil(GB7323-89) | Fully filled | |
Operation and Use
Correct operation and use as well as fine maintenance will make machine in optimum state, bring into play due efficiency and using life, reduce failures and machine-stopping maintenance time and lower use cost to produce maximum effect and profit, so you shall make yourself master of operation and use method of the machine to avoid unnecessary trouble and loss arising from misoperation or mistakes.
Special Attention
The force of the tension machine may be large, so it has particularly high request for ground anchor to ensure the reliability of the ground anchor.
In mountains and hilly areas, due to the space limitations, the tension machine can’t be in place at the center of the line, it has to be pushed to the right place by manpower. During this process, the potential energy of the machine should be paid particular attention to.
