|
[China]
Trade Verify
Address: 101A, 1st Floor, Building 20, Second Industrial Zone, Shapuwei Community, Songgang Street, Baoan District, Shenzhen China 518105
Contact name:Lily
SHENZHEN JIATUO PLASTIC MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
Plastic PET Strap Extrusion Line / Plastic Manufacturing Machine For PET Package Belt
PRODUCT DESCRIPTION
Descripition:
This machine is mainly used to make PET strap ,PP packing strap.
Our machines adopts the PLC control to realsize the whole line auotmatic production.
Using the melting pump and pressure sensor ensure the production stable and strap quality control.
The raw material can be 100% recycled pet flakes from the waste pet
bottles,or virgin material or mixed with each other.
PET Strap Production Line Machine List
| NO. | Item | Specification |
| 1 | Power | According to customer's factory voltage |
| 2 | Material | PET raw material or 100% PET bottle flakes recycled |
| 3 | Capacity | PETJT90:200kg/h PETJT100:250kg/h PETJT125:350kg/h |
| 4 | Product size | Width:9-32mm Thickness:0.6-12mm |
| 6 | Mid-height of extruder | 7000mm |
| 7 | Installation power | PETJT90:200KW PETJT100:250KW PETJT125:300KW |
| 8 | Humidity | <85% |
| 9 | Temperature | 0-40 degree |
| 10 | Cooling tower capacity | 30T/H or 50T/H |
| 11 | Installation Dimensions | PETJT90:45*2.0*7.0M PETJT100:45*2.0*7.0M PETJT125:60*3.0*8.0M |
| 12 | Product color | Green/Black/Pink/Yellow |
| 13 | Factory dimension | 35m*(3~6)m*(4~6)m 45m*(3~6)m*(4~6)m If your factory not big enough,please contact with us,our engineer can according to your size to design |
Features of PET packing strap production line:
Features: This production line uses PET waste mineral water,
Sprite, Coke and other bottle flakes as raw materials to produce
packing belts, with low cost and high efficiency.
The computer control system is used for real-time control of melt
temperature, pressure, extrusion speed, torque, traction, etc. to
ensure product quality. Equipment composition: Special equipment
Three stretching machines, ovens, molds, traction machines, control
boxes, winders, etc. General equipment Feeder, extruder, mold
temperature machine, chiller, dryer, air compressor, etc.
Features: ·PET belt, also known as plastic-steel belt, is a new
type of strapping belt that is popular in the world to replace
steel belt. It is widely used in steel, aluminum, chemical fiber,
cotton spinning, tobacco, paper, metal can making and other
industries.
·Strong tensile strength: It has both the tensile strength like a
steel belt and the ductility that can resist impact, which can
ensure the safety of your product transportation.
·Small elongation: The elongation is only one-sixth of that of
polypropylene (PP) tape, which can maintain tension for a long
time.
· Strong temperature resistance: the melting point is 260 degrees,
and it will not deform when used below 120 degrees. ·Good
flexibility: no sharp edges of steel belts, safe operation, neither
hurting hands nor damaging the bundled objects.
·Beautiful appearance and no rust: There is no risk of rusting the
steel belt to contaminate the bundled objects, and the color is
bright and can be seen.
·Good economic benefits: The length of 1 ton of plastic steel belt
is equivalent to 6 tons of steel belt, and the unit price per meter
is lower than that of steel belt, which can reduce the cost for
you.
PET and PP strap making machine introduction
As PET is easy to absorb moisture in the air, it must be fully dried. At the same time, in order to prevent bonding during drying, crystallization equipment needs to be configured. PP strap not need it.
Always PET two straps extrusion needs 90/30 single screw extruder.
PP two straps extrusion needs 75/30 single screw extruder.
Special design screw structurer could extrude PET PP materials
smoothl,it does not create excessive shear molecular structure, and
ensures the strength of the packing belt
It is controlled by PLC pressure closed loop control system. The pressure sensor will transmit signals, and PLC is used to control the speed of melt pump and extruder, so as to stabilize the extrusion of PET or PP materials
PET is Length 4000mm, PP 2000mm.
It is stainless steel materials.
The water is heated by water tank heating unit
The haul off rollers is five rollers, working to take PET or PP
strap materials out of water tank
The oven is heated by electric power. Heating air is spread evenly
by fans.
In the oven, the PET and PP strap will be stretched first time.
This device is working for PET strap second time stretching.
PP strap not need stretching.
This 38Crmoal materials, high surface hardness rollers do embossing
As PET and PP materials has high deformation prestress after stretching. It has to do annealing and water cooling to fix the size.
It is working to take the materials out of annealing oven and cooling tank before winders
The winder could be designed into servo motor unit, inverter motor unit and torque motor according PET or PP materials.
The unique back tooth shaft is used to make the packing belts neatly arranged without overlapping and no horn shape, so that the packing belts maintain a good straightness, which is more suitable for the use of automatic packing machines, and ensures that the automatic equipment conveyor belts are in place. Do not drop the belt.
