|
[China]
Trade Verify
Address: Shawa Industrial Area, Hejian City, Cangzhou City, Hebei Province, China
Contact name:
Hejian BaoHong Electrical Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Cantilever Type Single Twist Bunching Machine With Transmission Shaft
1. Application
The copper wire bunching machine is used for bunching aerospace,
medical equipment, cellphone and ultra-conductor (above seven pcs
of bare copper wires, tinned wires, silver jacketed wires and
enameled wires).
2. Performance
The series of equipment consist of PLC procedure, frequency
conversion speed-regulation control, pneumatic control, cantilever
cabling twist motion, bobbin capstan take-up motion and
reciprocating traverse motion are dual controlled by mechanical
linkage and pneumatic linkage,so, the excellent synchronous
performance of the unit from starting.
Normal opeartion,slow stop and emergency stop status, in
addition,the stable twist pitch is also ensure with small errorsat
the same time. Such cabling series are unique in the design of
production line.Advanced in technology and it is the prefered
product for the seriesproduction of cabling and wrapping.
3. Technical parameters
Model
| 400-500 | 630 | 800 | 1000 | 1250 |
Pay-off bobbin(mm)
| 300-400mm | 400-500-630 | 400-500-630 | 400-500-630 | 400-500-630 |
take-up bobbin(mm)
| 500 | 630 | 800 | 1000 | 1250 |
Wire diameter(mm)
| 0.5- 2.0 (Soft structure) | 0.6- 3.0(Soft structure) | 0.6-3.0(Soft structure) | 1.0-5.0 (Soft structure) | 1.0-5.0 (Soft structure) |
Max twist diameter(mm)
| Φ6 | Φ15 | Φ20 | Φ25 | Φ30 |
Lay length(mm)
| 13-80 | 20-200 | 30-300 | 30-350 | 30-350 |
Rotate speed(RPM)
| 850 | 1000 | 800 | 800 | 500 |
Take-up tension
| Auto tension,adjust freely | ||||
Traverse method
| According to bobbin speed reciprocating movement to adjust | ||||
Traverse pitch(mm)
| 2.5-10 | 2-12 | 3-20 | 3-30 | 3-30 |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
Since 2006, relying on the care and support of our customers, Baohong Machinery has been devoted to the research and development of wire stranding machine and laying-up machine and has made great improvement. Now we have become the only one factory who can develop the production of the JLK rigid stranding machine series to be an assembly line processing in China, and we also have independently developed the JGB Bow skip stranding lines, the CGB Bow skip type cabling lines and the CLY High speed Cradle type Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area of 10000 square meters, production workshop 8000 square meters. Our company has 60 employees, including 10 R & D staffs. Annual output value is over 10 million dollars at present,and has developed into one of the most important Stranding Machine Manufacturer in China.
