|
[China]
Trade Verify
Address: Shawa Industrial Area, Hejian City, Cangzhou City, Hebei Province, China
Contact name:
Hejian BaoHong Electrical Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
1000 R/Min Stranding Single Twist Bunching Machine For Core Wire
1. Application
The cantilever machine suit for various power wire, CAT5,ultraCAT5
and CAT6 data cable,commumication cable and other twist.
2. Performance
2.1. High rotate speed, main shaft is lubricated by thin oil,
cool warning if oil not enough ,which can lower the temperature and
the noise,extend the life of the machine.
2.2. The wire goes from belt to idler pulley of main shaft
directly,which can reduce scratch and keep round cross section.
2.3. Magnetic power clutch auto track and control taking up
tension,making the tension of taking up steadily.
3. Technical parameters
Model
| 400-500 | 630 | 800 | 1000 | 1250 |
Pay-off bobbin(mm)
| 300-400mm | 400-500-630 | 400-500-630 | 400-500-630 | 400-500-630 |
take-up bobbin(mm)
| 500 | 630 | 800 | 1000 | 1250 |
Wire diameter(mm)
| 0.5- 2.0 (Soft structure) | 0.6- 3.0(Soft structure) | 0.6-3.0(Soft structure) | 1.0-5.0 (Soft structure) | 1.0-5.0 (Soft structure) |
Max twist diameter(mm)
| Φ6 | Φ15 | Φ20 | Φ25 | Φ30 |
Lay length(mm)
| 13-80 | 20-200 | 30-300 | 30-350 | 30-350 |
Rotate speed(RPM)
| 850 | 1000 | 800 | 800 | 500 |
Take-up tension
| Auto tension,adjust freely | ||||
Traverse method
| According to bobbin speed reciprocating movement to adjust | ||||
Traverse pitch(mm)
| 2.5-10 | 2-12 | 3-20 | 3-30 | 3-30 |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
Since 2006, relying on the care and support of our customers, Baohong Machinery has been devoted to the research and development of wire stranding machine and laying-up machine and has made great improvement. Now we have become the only one factory who can develop the production of the JLK rigid stranding machine series to be an assembly line processing in China, and we also have independently developed the JGB Bow skip stranding lines, the CGB Bow skip type cabling lines and the CLY High speed Cradle type Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area of 10000 square meters, production workshop 8000 square meters. Our company has 60 employees, including 10 R & D staffs. Annual output value is over 10 million dollars at present,and has developed into one of the most important Stranding Machine Manufacturer in China.
