Professional Cable Machine Accessories Pay off and Take up Stand for Rewinding / Extruding Machine

The machine is of gantry traversing type with upper-mounted casing-pipe. The gantry frame is made by bending and welding. The two tail-centers of wire reel are moved up/down by feed screw nut driven by two motors via cycloid speed reducer. Each tail-block can move by itself, or the center-blocks can move simultaneously. Double protective device is also equipped. When necessary, it can also be equipped with tail spindles for wire reels with various specifications. The clamping of wire reel is realized by the motor driving the reducer with overload protection. The take up motor adopt 5.5kw AC variable frequency motor, which drives the main shaft of the reel to rotate through the gearbox. The take-up motor is controlled by Siemens G120 series controller, and the traverse is driven by 0.75KW Mitsubishi servo motor and Mitsubishi servo controller; The cable pitch is set through the touch screen, and the size and tension of the cable pitch can be set at any time; The whole machine is equipped with speed, tension and pitch adjustment; Take up forward and reverse inching buttons are set, and tension display and pitch display are set. Tension control of take-up is realized by torque or speed. Siemens PLC S7-200 is used to manage the whole machine, providing the connection channel and relevant signals with the main control system.

2. Technical Parameter

3. Photos